The ZY-CSB-1000 wall mounted ultrasonic flowmeter utilizes the principle of low voltage and multi pulse time difference, and adopts high-precision and ultra stable dual balanced signal detection and differential reception digital detection technology to measure the sound wave transmission time in the forward and reverse directions, and calculate the flow velocity based on the time difference. It has a very simple installation method, without breaking pipes or stopping water, allowing customers to easily achieve flexible measurement of pipeline flow. The product can also be equipped with installation fixtures, which do not require daily maintenance and provide reliable, drift free measurements over the long term. It adopts advanced digital correlation technology and intelligent adaptive sound wave technology, which makes its measurement stability more outstanding. At the same time, its sound focusing technology significantly enhances the signal reception quality of the product during continuous measurement.

1. SMT fully automatic surface mount circuit ensures high-quality product performance and low maintenance rate

2. Full menu software design, allowing for easy setting of parameters or types such as pipe diameter, pipe material, wall thickness, and output signals through menus

3. Automatically memorize positive and negative net cumulative traffic

4. Electrical isolation 0-20mA or 4-20mA current loop output

5. Isolate DC8-36V or AC85-264V multi-channel input and output

【PRODUCT MODEL】Product model: ZY-CSB-1000

【Applicable caliber】: DN15-DN50 with small sensor, DN50-700 with medium sensor, DN800-6000 with large sensor

【Applicable Medium】Purified liquids such as tap water, alcohol, and seawater

【Power supply mode】: Isolate DC8-36V or AC85-264V

【power consumption】Working current 50mA (without keyboard and buzzer)

【accuracy】Measurement value 1%

【Communication method】: RS485、 Support MODBUS protocol

【key】16 buttons

【Other functions】: Can automatically remember positive and negative net cumulative traffic

【Optional input】Three 4-20mA analog input circuits

【Optional output】: 1 isolated RS485 output

1-channel isolated 4-20mA or 0-20mA output (active or passive optional) with optional HART protocol

Dual isolation OTC output (OTC1 pulse width between 6-1000ms programmable, default 200ms)

The wall mounted ultrasonic flowmeter is divided into two parts: one part is the meter head (wall mounted and portable or handheld), and the other part is the sensor.

1Bracket installation

Installing a magnetic bracket sensor on the outer wall of the pipeline can achieve flow measurement. No need to disconnect or cut off pipes, no pressure loss.

By selecting bracket sensors of different sizes, it is possible to measure the flow rate of DN15-DN100 (small)/DN50-DN300 (medium)/DN300-DN700 (large) pipelines.

The standard specification can measure temperatures ranging from -30 to 90 ℃, and a high-temperature external clamp sensor can be selected to achieve liquid flow measurement at temperatures ranging from -30 to 160 ℃.

2. External clamp installation

Installing a magnetic clip on sensor on the outer wall of the pipeline can achieve flow measurement. No need to disconnect or cut off pipes, no pressure loss.

By selecting external clamp sensors of different sizes, it is possible to measure the flow rate of DN15-DN100 (small)/DN50-DN700 (medium)/DN300-DN6000 (large) pipelines.

The standard specification can measure temperatures ranging from -30 to 90 ℃, and a high-temperature external clamp sensor can be selected to achieve liquid flow measurement at temperatures ranging from -30 to 160 ℃.

3Plug in installation

Installing a magnetic plug-in sensor on the outer wall of the pipeline can achieve flow measurement. No need to disconnect or cut off pipes, no pressure loss.

By selecting different sizes of plug-in sensors, it is possible to measure the flow rate of DN15-DN100 (small)/DN50-DN700 (medium)/DN300-DN6000 (large) pipelines.

The standard specification can measure temperatures ranging from -30 to 90 ℃, and a high-temperature external clamp sensor can be selected to achieve liquid flow measurement at temperatures ranging from -30 to 160 ℃.