Product Introduction

----------------------------------------------------------------------

• characteristic:
  Measure the thickness of materials such as steel, cast iron, plastic, glass, aluminum, copper, etc

• 
  120MHz FPGA sampling rate, 150V square wave pulse generator

• Adjustable gain (40-52dB)

• Gain step spacing 3dB (vlow, low, med, high, vhi five levels)

• Manual or automatic zeroing

• Low temperature (-30 ℃) LCD display screen

• USB-C communication interface: Output data to computer (ZX-5/5DL only)

• USB to serial port function, optional RS232 or Bluetooth module (ZX-5 only)

• IP65 protection level

• Scanning measurement: automatically find the thinnest value within the scanning area of the tested material

ZX-3/5/5DL thickness gauge

measuring range

0.63-914.4mm (steel, depending on the probe)

Display units

mm/IN

Display accuracy

0.01mm/0.001IN

Sound speed range

305～18542m/s

Probe frequency

1MHz~10MHz (LEMO interface)

Zero adjustment

Manual or automatic zeroing

Probe diameter

Optional probe diameter to improve linearity

gain

40-52dB (step spacing 3dB)

screen

Large screen multifunctional low-temperature LCD display screen

Background light

Three working modes: off/normally on/automatic, with adjustable brightness levels of low/medium/high

Pulse repetition frequency

200Hz

Display refresh rate

10Hz

Scanning method

Measuring 100 points per second can capture the thinnest value during the scanning process

Difference mode

Display the difference between the measured value and the pre-set value. (ZX-5/5DL only)

Alarm function

If the measured value is less than the minimum allowable value entered by the user/higher than the maximum allowable value entered by the user, the red light will turn on and there will be a BB alarm sound prompt. The green light will indicate that the measurement is within the allowable range. (ZX-5/5DL only)

VX sound speed mode

Can measure the sound velocity value of materials (only ZX-5/5DL)

Power Supply

Two No. 5 batteries can be used continuously for up to 45 hours (the usage time may vary depending on the type of battery). When the battery power is insufficient, the monitor will display a low battery indicator. Automatic shutdown function (will automatically shut down after 5 minutes of no operation). USB interface power supply function (only ZX-5/5DL)

data storage

The built-in 32M memory card can store 10000 measurement data (divided into 40 storage files, each storage file can store 250 data) (ZX-5DL only). The storage file format is a universal. csv format and does not require specialized data communication software.

keyboard

9-key waterproof and oil resistant keyboard

Operating temperature

-30℃～75℃

size

63.5x131.3x31.5mm (extruded aluminum shell, bottom cover made of nickel plated aluminum plate, sturdy and durable)

weight

312g

packing

ABS engineering plastic box

Applicable standards

NIST & MIL-STD-4562A

Note: When measuring high-temperature surfaces with a high-temperature probe, a matching high-temperature coupling agent must be used.