VIP member
Water cooled full liquid screw industrial chiller unit
Water cooled full liquid screw industrial chiller unit
Product details
Product Introduction
1. The host adopts a semi enclosed screw compressor, integrating the motor and screw, without the worry of shaft seal leakage; Siemens microcomputer control; The dual unit has a stop start cycle control system, and balanced start stop can extend the service life of each component of the unit; Adopting an efficient full liquid evaporator, the full load energy efficiency ratio is as high as 5.4, greatly reducing the cost of use.
1. The host adopts a semi enclosed screw compressor, integrating the motor and screw, without the worry of shaft seal leakage; Siemens microcomputer control; The dual unit has a stop start cycle control system, and balanced start stop can extend the service life of each component of the unit; Adopting an efficient full liquid evaporator, the full load energy efficiency ratio is as high as 5.4, greatly reducing the cost of use.
2. Cooling capacity range: 309KW~1859KW
3. Cooling water temperature: adjustable from 4 to 20 degrees Celsius
4. Scope of application: Cold water required for production processes between 4 ° C and 20 ° C; The temperature requirement for the workshop environment is between 20 ° C and 28 ° C (which can be used as a workshop air conditioning unit);
5. Auxiliary equipment: cooling tower, cooling water pump.
6. Installation conditions: The unit is suitable for indoor installation.
7. Unit design: 24-hour non-stop operation for industrial use.
Product parameters
Product parameters
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-