WG drum shaped gear coupling-Global supplier

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone
Address

Botou Development Zone Industrial Park, Hebei Province

Contact Now

WG drum shaped gear coupling

Contact Supplier

More Products

Product details

Drum shaped toothedcouplingBelonging to rigid and flexible materialscoupling, toothed typecouplingIt is composed of an inner ring gear with the same number of teeth and a flange with outer teethcouplingWaiting for the components to form. External teeth are divided into two types: straight teeth and drum teeth. The so-called drum teeth refer to the outer teeth being made into a spherical surface, with the center of the spherical surface on the gear axis and a larger tooth flank clearance than general gearscouplingAllow for larger angular displacement (relative to straight teeth)coupling）It can improve the contact conditions of teeth, enhance the ability to transmit torque, and extend the service life. Toothed typecouplingDuring operation, the two axes produce relative angular displacement, and the tooth surfaces of the inner and outer teeth periodically slide axially relative to each other, inevitably resulting in tooth surface wear and power consumption. Therefore, the tooth typecouplingIt needs to work in a good and sealed condition. Toothed typecouplingSmall radial size, high load-bearing capacity, commonly used for shaft transmission under low-speed and heavy-duty working conditions, high-precision and dynamically balanced gear typecouplingCan be used for high-speed transmission, such as shaft transmission of gas turbines. Due to the drum shaped toothed structurecouplingAngular compensation is greater than spur gear compensationcouplingDrum shaped teeth are widely used both domestically and internationallycoupling, straight tooth typecouplingProducts that have been eliminated should be avoided as much as possible by users. The contact state along the tooth width when there is angular displacement. It has the ability to compensate for radial, axial, and angular axis deviations, and has the advantages of compact structure, small turning radius, large bearing capacity, high transmission efficiency, low noise, and long maintenance cycle. It is particularly suitable for low-speed and heavy-duty working conditions, such as metallurgy, mining, lifting and transportation industries, as well as shaft transmission for various types of machinery such as petroleum, chemical, and general machinery.
Our company producesDrum shaped toothedcouplingComplete variety and specifications,modelhave
G Ⅰ CL, G Ⅰ CLZ type - drum tooth typecoupling(JB/T 8845.3－2001)
G Ⅱ CL, G Ⅱ CLZ type - drum tooth typecoupling(JB/T 8845.2－2001)
GCLD type - drum tooth typecoupling(JB/T 8845.1－2001)
WGP type - drum toothed type with brake disccoupling( JB/T7001－93)
WGC type - vertical installation drum tooth typecoupling(JB/T7002－93)
WGZ type - drum toothed type with brake wheelcoupling(JB/T7003－93)
WGT type - connected to the middle sleeve with drum shaped teethcoupling(JB/T7004－93)
TGL type - Nylon inner ring gear drum tooth typecoupling( JB/T5514－91)
WGJ type - connected to the intermediate shaft drum tooth typecoupling(JB/T8821－1998)
NGCL type - with brake wheel type (JB/ZQ4644-97)
NGCLZ type - with brake wheel type (JB/ZQ4645-97)
WG type - with brake wheel type (JB/ZQ4186-97)
CL type toothed coupling (JB/ZQ 4218-86)
CLZ type toothed coupling (JB/ZQ 4218-86)
NL type - Nylon inner ring gear drum tooth typecoupling(DB 3202-87

Contact number: 0317-8288803 Website: www.btjgc.com

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content