Vertical ring machine SL-HT800L

Vertical ring bodyWinding machineThe packaging machine is a novel winding packaging machine designed and manufactured specifically for production enterprises such as steel wire coils, welding wire coils, rubber tube coils, PPR/PVC tube coils, high-pressure rubber tube coils, brake band coils, and automotive wheel bones. Its advantage is that it is made of high-quality steel, which is durable and can last for more than ten years. Secondly, it has replaced the manual production mode, with high production efficiency, reduced labor intensity for workers, and improved the working environment for workers. Workers work in a relaxed, safe, and clean environment. The packaging effect is neat and can be packaged with multiple layers of paper, which can prevent dust, moisture, and protect the surface of the product.

Selection parameters:

Packaging process instructions:

Using inner diameter of 50-76mm, outer diameter of 100-400mm, and width of 45-120mm wrapped film/textile tape/composite paper tape, the packaging film rack is installed parallel to the winding ring or on the side, and the packaging film is perforated and wrapped

1. The operator adjusts the position between the rotating ring and the object according to the size of the object to be packaged, with the rotating ring passing through the inner hole unobstructed

2. Place the object to be packaged firmly on the parallel rollers and input the specifications of the packaged product (do not input if there is no change in the product specifications)

3. Wrap the wrapping film around the edge of the package, press the start switch, and the aluminum ring starts to rotate. Then, the roller drives the package to rotate radially 360 °, and it automatically stops or presses the stop switch. Aluminum rings and rollers stop running.

4. After completing the packaging, use adhesive tape to bond the tail tape. Take out the packaged object.

This device is a customized model, and the selection needs to be confirmed based on the actual situation of the customer's product, such as material, outer diameter, inner diameter, and width.