Product Introduction

The cost-effective US UE switch 24 series vacuum switch features a unique compact size, excellent performance, and environmental friendliness. In highly corrosive working conditions, the 24 series vacuum switch with brass, polysulfone (approved by the US Food and Drug Administration), or PFA PTFE pressure interface is durable and long-lasting. The combination of precision quick action switches and sensitive membranes can provide a narrow dead zone and a range span with reproducibility of approximately ± 1%.

Technical Parameter

Storage temperature: -29 ° C... 82 ° C

Environmental temperature: -1 ° C... 71 ° C. Set point around 28 ° C

Switching less than ± 0.6% of the range

Medium temperature: maximum 93 ° C, working pressure 68.9bar

Impact resistance: After a 10 millisecond, 15G impact test, the set point can be reproduced

Anti vibration: After 2.5G and 5-500Hz vibration tests, the set point can be reproduced

Repeatability: ± 1% of the adjustable range of the set point.

Switch output: A SPDT micro switch with a lifespan of 10 million cycles.

The actual lifespan depends on the electrical load and cycle frequency.

Electrical ratings: 125VAC and 250VAC, rated current 5A and induced current 5A,

1/4 high power; The minimum load of the gold contact is 5mA@6VDC 、

2mA@12VDC The 1mA@24VDC .

Electrical interface: 7/8 "deep hole, 1/2" NPT pipe connection.

The wiring terminals are fixed with screws, and the thickest wire size is 16 (AWG).

Pressure interface: Models 013-014, 019-022: 1/4 "NPT (internal thread) brass connection

Model 011-012, 015-018:1/4 "NPS (internal thread) polysulfone connection

Installation: Install with two screws through the surface sand hole or through the pressure interface

Weight: 0.18Kg