UV ultraviolet laser marking machine-Global supplier

Tianxiong Laser, 1st Floor, Poly Industrial Park, No. 10 Huiyuan Road, Wangniudun Town, Dongguan City

Introduction to UV Laser Marking Machine Equipment

UV laser marking machine, commonly used laser powers include: 2 watts, 3 watts, 5 watts, and 8 watts. 10 watts, UV laser marking machine with high beam quality and very small spot size, capable of achieving high-precision marking; Perfect marking quality: 355nm output wavelength can effectively reduce the thermal impact on the workpiece; High precision marking with galvanometer, precise marking effect and repeatable processing; High precision spot ensures perfect marking results; The marking process is non-contact, and the marking effect is effective; UV laser marking machine has a wide range of applications; The heat affected area is extremely small, and there will be no deformation or burning of the heat affected material; Fast marking speed and high efficiency; The whole machine has stable performance, small size, and low power consumption. Suitable for marking materials with high thermal radiation reactions; Can be coordinated with production lines, automatic loading and unloading, and automatic feeding and discharging; Suitable for marking on the vast majority of metal and non-metal materials.

Characteristics of UV ultraviolet laser marking machine equipment

The UV ultraviolet laser marking machine equipment is developed using a 355nm ultraviolet laser. The machine adopts third-order intracavity doubling technology. Compared with infrared laser, the focused spot of 355nm ultraviolet light is very small. The marking effect is to directly break the molecular chain of the material through short wavelength laser, which greatly reduces the mechanical deformation and thermal deformation of the material (belonging to cold light). Because it is mainly used for ultra-fine marking and engraving, it is particularly suitable for marking food, pharmaceutical packaging materials, micro hole drilling, high-speed division of glass materials, and complex graphic cutting of silicon wafers, UV ultraviolet laser marking machine is a type of laser marking machine that is pumped by a high-power multi-mode laser diode to generate a laser beam that is then doubled in frequency. The laser beam path is then changed by computer-controlled high-speed scanning mirrors to achieve laser marking. Due to its fine spot size and almost no heat during processing, UV ultraviolet laser marking machine is suitable for materials that are sensitive to heat. UV ultraviolet laser marking machine is sufficient for plastic metal engraving, but it is more suitable for glass marking or ceramic cutting of flexible PCB circuit boards. UV ultraviolet laser marking machine has advantages in marking soft ceramics, glass, and plastics. The sentence is:.

Structural analysis of UV ultraviolet laser marking machine equipment

Equipment parameter table of UV ultraviolet laser marking machine

average output power	2W	3W	5W	8W	10W
wavelength	355nm
Pulse width/Q frequency	< 20ns@50K
Beam Quality	M2<1.2	M2<1.2	M2<1.2	M2<1.2	M2<1.2
Marking format	110 × 110mm optional (70x70mm, 150x150mm, 200x200mm) dynamic focusing format: 300mm * 300mm
repeatability	＜20μ
Carving line speed	≤7000mm/s
Cooling method	forced air cooling	water-cooling	water-cooling	water-cooling	water-cooling
Minimum character height	0.2mm		0.2mm
Laser type	355 ultraviolet pulsed solid-state laser
Overall dimensions (L * W * H)	800mm × 680mm × 1200mm (depending on the specific situation)
power supply	AC 220V 50KHz
upgradeable	Electric lifting manual two-dimensional worktable, electric two-dimensional table rotating fixture, red light focusing

Introduction to the software functions of UV ultraviolet laser marking machine

Precautions for using UV ultraviolet laser marking machine

1. When using the UV laser marking machine, it is important to avoid sudden power outages, as this can cause data loss and even damage to the machine's hardware. It is recommended to install a UPS power stabilizer.
2. In harsh environments, regularly wipe the focusing lens with a dust-free cloth and use high concentration alcohol for wiping. Other lenses do not need to be wiped.
3. Do not frequently move the position. The UV laser marking machine has optical components inside, and moving the position can cause internal parts to loosen, which can result in the machine not functioning properly
4. Non professionals are not allowed to open the chassis. Even if they need to open the chassis, they need to shut down the power and unplug the main power plug.
5. Regularly replace the cooling water inside the chiller.
6. It is strictly prohibited to look up from the bottom of the focusing lens during equipment operation to avoid permanent damage to the eyes.
7. When the equipment is working, try not to let your hands come into contact with the laser beam to avoid long-term contact and skin peeling.

UV laser marking machine after-sales service

Delivery list of UV laser marking machine: delivery note, metal adjustment plate, tool set, training service list;
After sales and service of UV laser marking machine: home delivery, technical engineers on-site installation, debugging and training, lifelong technical support, lifelong software free upgrade, 2-hour response after sales, on-site processing within 24 hours, after-sales phone: 400-829-6628