Product Introduction
AmericaTSI DUSTTRAK II 8530Desktop aerosol monitor can measure total dust concentration and also detectPM1,PM2.5,PM10The test results are accurate, easy to operate, and portable, widely used in fields such as on-site environmental assessment, occupational health investigation, and indoor air quality research.
The DUST TRAK TM II aerosol monitor is powered by a battery, records data, and uses a light scattering laser photometer to provide real-time readings of aerosol mass concentration. They use sheath gas systems to isolate aerosols in the optical chamber, maintain optical cleanliness, and improve reliability and low maintenance costs. This instrument can be used in clean offices, as well as in harsh industrial workshops, construction sites, environmental monitoring, and other outdoor environments.DUST TRAK TM IIThe monitor can measure aerosols in dust, smoke, thick smoke, and thin mist.
The instrument comes with a dust extension rod
Automatic zero adjustment module(option)
Sampling and weighing of 37mm filter cartridge
TRAKPROTM data analysis software
L can be directly set and programmed
Print charts, raw data tables, statistics, and comprehensive reports
Industrial and Occupational Health Survey
Indoor Air Quality Survey
Outdoor environmental monitoring
Baseline trend tracking and monitoring
Point source monitoring
Engineering Control Evaluation
Engineering research
Remote monitoring
Process monitoring
Emission monitoring
Aerosol research
Easy to program and operate
New graphical interface and color touch screen
Perform online weight analysis for convenient daily reference and calibration
Automatic zeroing(Option for use: Zeroing module)Reduce zero drift
L can measurePM1、PM2.5、PM10And inhalable particulate matter
Lithium ion rechargeable battery
L has internal and external battery charging functions
The external port can perform equal power sampling
Replaceable sheath air and pump filters
lRecord the characteristics of testing pause and restart
-Color touch screen-Manual mode and programmable mode
-Through the computerTRAKPROTMdata analysis software
User adjustable calibration settings
Instantaneous alarm setting, which can use visual and auditory alarms
Real time graphical display
Statistical information can be viewed during and after the sampling period
Instrument status indicators displayed on the screen: flow rate, laser, and filter
Filter service indicator for preventive maintenance
Hot swappable battery
Weighing and sampling function
long-life10,000Internal pump for hours
TRAKPRO data analysis software
Automatic zero adjustment module(option)
STEF alarm set point
TECHNICAL INDEX |
8530 |
sensor type |
90light scattering |
Aerosol concentration range |
0.001~400mg/m3 |
show contents |
Display separatelyPM1,PM2.5Inhalable particulate matter,PM10And the full particle size |
resolution |
±0.1%reading,0.001mg/m3Take the maximum value |
Zero stability |
±0.002mg/m3twenty-four10Hour, |
Duration in seconds |
0.1particle size range15arriveµ |
m |
internet trafficFactory settings3.0L/min,1.40to3.0 L/min |
User adjustment |
Traffic accuracyThe factory set point±5% |
Built in traffic control |
temperature coefficient |
+0.001mg/m3/℃ |
0operate temperaturearrive |
50℃ |
-20storage temperaturearrive |
60℃ |
0Operating humidityarrive95% |
Relative humidity, no condensation |
time constant1User adjustable,60arrive |
second |
data record 5MBMemory(>60,000data point)145Minute sampling interval, can be recorded |
day |
Record Interval1Adjustable,1Seconds to |
hourExternal dimensions |
(HWD)13.5x21.6x22.4 |
cm |
communicationUSBAnd Ethernet, the stored data can be accessed throughU |
Disk storage |
AC power supply |
115-240VAC |
Analog Output0User selects output~5V2perhaps~20mA |
User selection ratio range |
ALARM INRelay or buzzer/ |
relay |
screen5.7in,VGA |
colorful touch screen |
Weighing and Samplingreplaceable37mm |
Filter cartridgeCE |
specificationsImmunity: |