THL120 portable Leeb hardness tester

Product Features

l use128×64Graphic dot matrix LCD display, rich in information.

l Full Chinese display, menu style operation, simple and convenient operation.

l haveUSBInterface, multiple communication methods to meet the individual needs of different users.

l One host can be equipped with7Different impact devices can be used without recalibration during replacementAutomatically identify the type of impact device.

l Storable373Group (number of impacts)32~1）Information such as single measurement value, average value, measurement date, impact direction, frequency, material, hardness system, etc.

l The upper and lower limits of the hardness value can be pre-set, and an automatic alarm will be triggered if it exceeds the range, which is convenient for users to test in batches.

l White backlit display, convenient for use in dark environments.

l There is a charging process indicator on the LCD, and the operator can check the charging level at any time.

l Equipped with software calibration function for indication.

l Support "forged steel (Steel）”Material, when using D/DCWhen testing "forged steel" specimens with a type of impact device, H can be directly readBprice.

l The printer is designed to be integrated with the host, and can print any number of measurement results.

l Built in large capacity lithium-ion rechargeable battery and charging control circuit, with ultra long working time.

Technical Parameter

l Measurement range: HLD (170-960) HLD

l Measurement direction: 360 °

l Hardness system: Leeb, Brinell, Rockwell B, Rockwell C, Rockwell A, Vickers, Shore

l Upper and lower limit setting range: same as the measurement range

l Working voltage: 8.2V

l Charging time: 3～5 hours

l Charging power supply: 9V/1000mA

l Continuous working time: about 500 hours (without backlight)

l Communication interface standard: USB

l Dimensions: 212×80×35mm(Host)

l Weight: Approximately 175g(Host)

l Environmental temperature -10℃～50℃

l Relative humidity ≤90％

Main purpose

l Installed mechanical or long-term assembly components.

l Mold cavity.

l Heavy duty workpieces.

l Failure analysis of pressure vessels, steam turbine generators and their equipment.

l A workpiece with a very narrow experimental space.

l Bearings and other components.

l Require formal original records of test results.

l Classification of materials in metal material warehouses.

l Rapid inspection of multiple measurement points on a large scale of large workpieces.

Basic configuration

（1）1 host(including printer)(2) One D-type impact device; (3) 1 small support ring; (4) 1 nylon brush (I);

(5) 1 Leeb hardness block; (6) 1 charger; （7）communication1 set of software; (8) 1 communication cable; (9) 1 instrument box