Product Introduction:

The TGH-STTL total thallium water quality online automatic monitoring instrument adopts the detection principle of anodic stripping voltammetry. The pre treated water sample is digested under high temperature and high pressure conditions, and then the rapid detection of thallium in water quality is completed through a three electrode system. The measurement method used by the instrument meets the requirements of the standard "Determination of Zinc, Cadmium, Chromium, and Copper in Water Quality - On site Rapid Monitoring - Anodic Stripping Voltammetry".

Product features:

1. Select valve components: Choose reagent sampling timing, flexible and diverse channels, with advantages such as minimum volume, easy maintenance, and long service life.

2. Visual photoelectric system: Through the visual photoelectric system, precise measurement of reagents is achieved, overcoming quantitative errors caused by wear of peristaltic pump tubes.

3. Micro metering component: With precise quantification of trace reagents, it reduces the amount of reagents used.

4. Sample injection component: Peristaltic pump negative pressure suction, an air buffer zone is set between the reagent and the pump tube to avoid corrosion of the pump tube; At the same time, it makes the mixing of reagents more concise and flexible.

5. It has functions such as automatic range switching, automatic standard sample verification, and waste liquid separation.

6. Reagent tube: Imported modified PTFE transparent hose with a diameter greater than 1.5mm is used to reduce the probability of particle blockage in water samples.

Technical parameters:

Application areas:

Used for measuring thallium content in wastewater and surface water. Mainly used for water quality monitoring of pollution sources, industrial production process water, industrial and municipal sewage treatment, etc.