1、 Purpose:
ZOOM-640E/ZOOM-640Z stereomicroscope can produce upright three-dimensional spatial images when observing objects. Strong stereoscopic effect, clear and wide imaging, and long working distance make it a widely applicable conventional microscope. Stereoscopic microscope is easy to operate, intuitive, and has high calibration efficiency. It is suitable for inspection of electronic production lines, printed circuit boards, welding defects (printing misalignment, edge collapse, etc.) in printed circuit components, single board PC calibration, vacuum fluorescent display VFD calibration, and more. Stereoscopic microscope magnifies the image of the physical object and displays it on the computer screen, allowing for image editing, saving, and printing. Equipped with measurement software, various data can be measured. |
| 2、 System Introduction |
| The stereo microscope system is an organic combination of traditional optical microscopes and computers (digital cameras) through photoelectric converters. It can not only be used for microscopic observation through eyepieces, but also for observing real dynamic images on the computer (digital camera) display screen, and can edit, save, and print the required images. |
| 3、 Technical parameters: |
1. Eyepiece
| type |
magnification |
Field of view (mm) |
| eyepiece |
10X |
φ20 |
2. Objective zoom range 0.7X-4.5X
3. The microscope is continuously variable magnification with a magnification ratio of 6.5:1
4. Dual pupillary distance adjustment range 55-75mm
5. Mobile working distance: 200mm
6. Total magnification: 7-350X (taking a 17 inch monitor with a 2X large objective lens as an example)
7. You can directly observe physical images on the TV or computer |
| |
|
|
|
Computerized stereomicroscopeZOOM-640E |
| View large image |
|
|
Digital stereomicroscopeZOOM-640Z |
| View large image |
|
