Stainless steel water flow switch product display:

Stainless steel water flow switch product details:
The flow switch consists of a magnetic core, a reset spring, a forged copper or carbon shell, and a sensor. The shell is made of H58 forged copper wall, iron wall or polycarbonate, the magnetic core is made of neodymium iron boron permanent magnet material, and the sensor magnetic switch is an imported medium power component. The inlet and outlet interfaces are both G1/2 "standard pipe threads.
Working principle: When the water flow rate in the pipeline is greater than 0.75L/min, the magnetic core is displaced by the water flow and drives the magnetic source to produce a magnetic control effect, causing the sensor to output a "1" switch signal. This signal is input to the equipment control system, and after power amplification, it achieves the purpose of water flow control. When the water flow rate in the pipeline is less than 0.75L/min, the magnetic core drives the magnetic source back to its original position under the thrust of the reset spring, causing the sensor to output a "0" switch signal and stop the system from working. Flow switches have advantages such as high sensitivity and strong durability.
Main parameters:
Exterior dimensions: Length * Diameter=58MM * ￠ 25MM
Suitable ambient temperature ≥ 1 ℃
Suitable working temperature ≤ 100 ℃
Zui small startup flow rate: ≥ 0.75L/min
Maximum throughput flow rate: ≤ 5L/min
Rated working pressure ≤ 0.65Mpa
Shell maximum pressure ≤ 1.5Mpa
Signal output load DC24V/1A, AC36V/1V or AC220V/0.1A
Scope and conditions of adaptation:
(1) The ambient temperature shall not be lower than 0 ℃. Do not strike the shell. Stay away from magnetic objects.
(2) The output of the signal is a switch quantity, so the connection method of the controlled object must also be a switch control relationship.
(3) The power of the controlled object shall not exceed the signal load capacity.
(4) This device is a water-based control device and cannot be used for controlling other media.