• 

XG1700 is a product specifically designed for testing, production, and research and developmentProgrammable DC power supply designed for laboratory, OEM, and quality control applications. It provides 1700W of power in a 1U size, with features such as constant voltage and constant current modes, automatic switching, high cost-effectiveness, and easy integration.

Main characteristics

Easy to integrate

Provide multiple control and indication signals, such as shutdown, constantVoltage (CV) constant current (CC) mode indication, OVP (overvoltage protection), OCP (overcurrent protection), OTP (over temperature protection), etc. In addition, logic high and low levels can be freely selected, so XG1700 can replace existing power sources without much system engineering knowledge.

Optional simulation control range

Most DC power supplies provide modes of 0-5V or 0-10VProposed input, corresponding to controlling the DC output from 0V to full range. The analog input range of XG1700 can be freely selected between 0V and 2V-10V, which means that the analog programming interface range can be adjusted arbitrarily.

Provide auxiliary DC output channel with control functionMany automatic testing systems require one or more low-power fixed power sources to power various peripherals inside their cabinets. For this purpose, XG 1700 provides 2 standard auxiliary DC output channels. Both outputs can be directly controlled through the front panel or SCPI commands. With these channels, it is possible to directly drive the output (turn off or reverse the polarity of the relay) without the need for complex microcomputer controlled relay boards.

Can output DC waveform through built-in sequence function

To program very quickly, you can useUSB, RS232/485, LXI, or GPIB interfaces use SCPI commands to program and store sequences in memory.

Fan variable speed control

It uses internal radiator temperature to control fan rotationThe innovative solution of speed is to adjust the fan to the optimal constant speed when the power supply outputs electrical energy to the outside, thereby

Reduce fan noise and extend lifespan.

Power saving standby mode

When in idle state, XG 1700 acts like an electric vehicleEntering 'sleep mode' like a brain monitor reduces energy consumption and noise. In sleep mode, the power is actually still on, allowing users to activate the output faster.

Main mode

Output self start mode (automatic restart)After the power supply recovers from a complete power on cycle (with all front panel lights off) or from a malfunction or restart of the upper computer, the self starting mode can establish the output state of the power supply. In this mode, the power output will return to the previous set value.

In addition, when remote digital control is lost, XG power supplyIt will maintain the last programming instruction without interrupting any testing process.

Auxiliary output self starting mode

Auxiliary output self starting mode can detect complete power on cycleThe auxiliary output status after the front panel lights are not completely off.

In this mode, the auxiliary output will be turned on again when the power is turned onLater activated.

Foldback Mode

The turn back mode is used to turn off the input during the operation mode transitionGet out. When the power supply switches to constant voltage or constant current mode, the power supply will turn off/disable the output according to the delay set in the turn back mode and lock the power supply in the turn back mode. This feature is particularly suitable for protecting loads that are sensitive to voltage or current.

The turn back mode can be set to switch from constant voltage to constant voltageTrigger the switch when switching from constant current to constant voltage mode.