Product Details

1、 Product Overview of Small Diameter Turbine Flowmeters:

The LWGY small caliber turbine flowmeter is a new generation of turbine flowmeter that has been optimized and designed based on advanced technology of flow meters at home and abroad. It has the characteristics of simple structure, lightweight, high accuracy, good reproducibility, sensitive response, and easy installation, maintenance, and use. It is widely used to measure liquids in sealed pipelines that do not corrode stainless steel 1Cr18Ni9Ti, 2Cr13, corundum Al2O3, and hard alloys, and have no impurities such as fibers or particles. The liquid with a kinematic viscosity of less than 5 × 10-6m2/s at working temperature can be used after real liquid calibration for liquids with a kinematic viscosity greater than 5 × 10-6m2/s. If paired with display instruments with special functions, it can also perform quantitative control, over limit alarm, etc., making it an ideal instrument for flow measurement and energy conservation.

Product features of small-diameter turbine flowmeter:

1. High quality turbine, beyond the conventional range

2. Multiple transmitters suitable for different application requirements

3. 3. Intelligent processing of unique instrument coefficient multi-point nonlinear correction

4. 4. Standard flow verification device ensures product accuracy

5. 5.100% stress testing, 100% product verification

6. 6. Pulse, two-wire 4-20mADC current and other signal outputs

7. 7. Instrument coefficient and cumulative flow value can be maintained for ten years without losing power

Technical parameters of small-diameter turbine flowmeter products:

Nominal caliber:

Pipeline type: DN4 to DN200

Insertion type: DN100~DN2000

Accuracy level: Pipeline type: ± 0.5 level, ± 1.0 level Insertion type: ± 1.5 level, ± 2.5 level High precision can reach 0.2 level

Environmental temperature: -20 ℃~50 ℃ Medium temperature: Measurement liquid: -20 ℃~120 ℃ Measurement gas: -20 ℃~80 ℃

Atmospheric pressure: 86KPa~106KPa nominal pressure: 1.6 Mpa, 2.5 Mpa, 6.4 Mpa, 25 Mpa

Explosion proof grade: ExdIIBT4 Connection methods: threaded connection, flange clamping, flange connection, plug-in type, etc

Requirements for straight pipe section: Gas: The upstream straight pipe section should be ≥ 10DN, and the downstream straight pipe section should be ≥ 5DN

Liquid: The upstream straight pipe section should be ≥ 20DN, and the downstream straight pipe section should be ≥ 5DN. Insertion type: The upstream straight pipe section should be ≥ 20DS, and the downstream straight pipe section should be ≥ 7DS (DS is the measured inner diameter of the pipeline). Display mode: (1) Remote display: Pulse output, current output (with display instrument). (2) On site display: 8-bit LCD displays cumulative flow rate, unit (m3). 4-digit LCD displays instantaneous flow rate, unit (m3/h), battery power, frequency, flow rate. (3) Temperature and pressure compensation type: A. Display standard instantaneous flow rate and standard cumulative flow rate B. Display current pressure, temperature, battery voltage output function: (1) Pulse output, The p-p value is determined by the power supply. (2) 4-20mA two-wire current output. (3) Unit volume pulse output and sensor raw pulse output. (4) Sanitary flowmeter with RS485 communication interface. Power supply: (1) DC5-24V. (2) Standard 3V lithium battery installed inside the instrument can be used continuously for more than eight years. (3) Temperature and pressure compensation 3V lithium battery installed inside the instrument can be used continuously for more than four years

• Type: Speed type

• Measurement range: 0-99999

• Accuracy level: 0.5 level

• Nominal diameter: DN2-DN300

• Applicable medium: Pure liquid

• Work pressure: 0.25-6.3MPa

• Working temperature: -10-110 degrees Celsius

•