1.Silver conductive adhesive503

l High temperature resistant silver conductive adhesive503, mainly used forSEMSample preparation involves bonding the sample to the sample stage to ensure good conductivity and improve the quality of observed images.

l Can withstand temperatures up to260°C

l Temperature has a wide range:–40° to 260°

l High conductivity, excellent adhesive for substrates

l Dry at room temperature

l Ready to use type

Product parameters:

Parameters after adhesive drying:

ordering information;

2.SPISilver conductive adhesive/Conductive silver adhesive

High density silver conductive adhesive, with a small brush, evenly dried, combining the virtues of quality and convenience. The electron microscope room is often used to bond samples to the sample stage. For the parameters of this adhesive, please refer to the product documentation.

Ordering information:

3.Silver conductive adhesive478SS

Silver conductive adhesive478SSCan be up to93°Cmaintain15Minutes, the higher the temperature, the less coating time is required.

orderInformation:

4.Silver glue

The average size of silver particles shall not exceed10umThere is a brush at the opening of the bottle. The working temperature is200centigrade,30minute.

l Main purpose: To adhere samples to sample holders, or to micro detectors, or to inclined surfaces of transmission electron microscopes.

l Dry quickly

l Diluents areEthyl Cellosolve

l Usage: Brush or dip. Mix well before use and always cover with a lid

l Store in a cool and dry place

l Belonging to thermosetting substances, the temperature should not exceed85℃

orderinformation：

Remarks:12630and12641Mixed use,12640and12641Mixed use.