project

description

Sensor voltage

DC10V/2.5V output current: digital 4-wire system with voltage adjustment at 120mA

Sensor input range

- 3 + 3 mV / V ~

Gain adjustment

By automatically adjusting internal operations.

Equivalent input
Calibration range

Setting range: 0.500 mV/V to 3 mV/V Error: 0.1% FS.

display

Color STN LCD (320 × 240 dots), indicator value: ± 99999

Display items

Weight: kilograms, G，T， Force: N, KN, Nano
Pressure: N/m2, Pa, kPa, MPa, bar
*The setting of 'no unit' is also feasible

A/D converter

Speed: 2000 times/second, 24 bits (binary)

precision

Non linearity: at 0.02% fs ± 1 digit (3 mV/V input); Zero drift: at 0.5 V/℃ μ RTI; Gain drift: 0.01%/℃)

Analog filter

LPF (low-pass filter, -6dB/month)
30/100/300/1000 Hz digital adjustment

Analog monitor output

Output level: approximately 2V per 1mV/V, input load resistance: 2K Ω or more

Interface (built-in)

RS-232C communication interface [synchronous, full duplex, transmission speed: 9600 bps~57600]
Dedicated printer and external display [2-wire serial interface transmission speed: 600 bps]

Wave Profile Holdings

Tracking, Sampling, and Keeping
Peak/Bottom/Peak/Average - Range Setting
Maximum value, minimum value, inflection point

External output signal

HI/LO comparison output (HH, Hi, okay, look, LL)/run output/hold output/VCE after event graph drawing=30V output (maximum), IC=30mA (maximum)

External input signal

Job Selection Input Control Input/Digital Zero Input (DZ)/Drawing Control Input/Calibration Selection Input LC=10mA or lower

power supply voltage

~AC100 240V (15%/10%) 50/60Hz

operating conditions

Temperature: 10 ± 40 ℃~; Humidity: Relative humidity of 80% or lower (without condensation)

external dimensions

99.5 (W) × 96 (hours) × 138 (D) millimeters (excluding protruding parts)
Panel cutting size 92 × 92 (+0) mm

weight

About 1kg

project

description

BCD

BCD code parallel data output interface
BCD connector connection

DAV

D/A converter
Output voltage: 10 ± 10 V (Zero point output and full-scale output can be adjusted digitally)

Dai people

D/A converter
Output current: 20mA (4~Zero point output and full-scale output can be adjusted digitally)

DC power supply

DC24V (± 15%), power consumption: 20W maximum
Surge current (typical value): 55a, 1msec (cold start at room temperature)

Portable case

The dedicated portable case is equipped with an NDK connector, power switch, and power cable on the rear side to ensure that when this option needs to be delivered, we manufacture various sensors and provide customers with calibration and setting values consistent with the ds-6200 sensor to be coupled.