The integrated electromagnetic flowmeter is an induction instrument that measures the volume flow rate of conductive medium inside a tube based on Faraday's law of electromagnetic induction. It adopts embedded technology of single-chip microcomputer to achieve digital excitation, and adopts CAN fieldbus on the electromagnetic flowmeter, which has reached the domestic level of technology. The RZ-LD integrated electromagnetic flowmeter can not only meet on-site display requirements, but also output 4-20mA current signals for recording, regulation, and control. It has been widely used in industrial technology and management departments such as chemical, environmental protection, metallurgy, medicine, papermaking, and water supply and drainage. In addition to measuring the flow rate of general conductive liquids, the RZ-LD electromagnetic flowmeter can also measure the volumetric flow rate of liquid-solid two-phase flow, high viscosity liquid flow, and salt, strong acid, and strong alkali liquids.
Performance characteristics of integrated electromagnetic flowmeter:

The instrument structure is simple, reliable, without moving parts, and has a long working life.

There are no flow blocking components, and there is no pressure loss or fluid blockage.

◆ No mechanical inertia, fast response, good stability, can be applied to automatic detection, adjustment, and program control systems.

The measurement accuracy is not affected by the type of measured medium and its physical parameters such as temperature, viscosity, density, pressure, etc.

◆ Different combinations of PTFE or rubber lining and electrode materials such as Hc, Hb, 316L, Ti can adapt to the needs of different media.

There are various flow meter models available, including pipeline type and plug-in type.

Using EEPROM memory, the storage of measurement and operation data ensures safety and reliability.

◆ It has two types: integrated and separated.

High definition LCD backlit display.

Technical parameters of electromagnetic flowmeter:

Instrument accuracy: pipeline type 0.5 level, 1.0 level; Insertion type 2.5 level

Measurement medium: various liquid and liquid-solid two-phase fluids with conductivity greater than 5 μ S/cm.

Flow velocity range: 0.2-8m/s

Work pressure: 1.6MPa

◆ Environmental temperature: -40 ℃ to+50 ℃

◆ Medium temperature: PTFE lining ≤ 180 ℃

Rubber material lining ≤ 65 ℃

Explosion proof mark: Exmibd Ⅱ BT4

Explosion proof certificate number: GYB01349

External magnetic interference: ≤ 400A/m

◆ Shell protection: Integrated type: IP65;

Detached type: Sensor IP68 (5 meters underwater, limited to rubber lining)

Converter IP65

Output signal: 4-20mA.DC, load resistance 0-750 Ω

Communication output: RS485 or CAN bus

◆ Electrical connection: M20 × 1.5 internal thread, φ 10 cable hole

Power supply voltage: 90-220V AC, 24 ± 10% V.DC

◆ High power consumption: ≤ 10VA

Selection of integrated electromagnetic flowmeter instrument:

◆ Range confirmation

The flow rate of the medium measured by the general industrial electromagnetic flowmeter should be 2-4m/s. In special circumstances, the low flow rate should not be less than 0.2m/s, and the high flow rate should not exceed 8m/s. If the medium contains solid particles, the commonly used flow rate should be less than 3m/s to prevent excessive friction between the lining and the electrode; For viscous fluids, the flow velocity can be chosen to be greater than 2m/s. A higher flow velocity helps to automatically eliminate the effect of viscous substances attached to the electrode, which is beneficial for improving measurement accuracy.

Under the condition that the range Q has been determined, the size of the flowmeter diameter D can be determined based on the range of flow velocity V mentioned above, and its value can be calculated by the following formula:

Q=πD²V/4

Q: Flow rate (㎡/h) D: Inner diameter of pipeline V: Flow rate (m/h)

The range Q of the electromagnetic flowmeter should be greater than the expected large flow value, while the normal flow value should be slightly greater than 50% of the flowmeter's full range scale.

MS-LD integrated electromagnetic flowmeter selection table:

model	Diameter (mm)	Flow range (m3/h)	Caliber (mm)	Caliber (mm)	Flow range (m3/h)
MS--LD15	DN15	0.32-6.36	MS--LD/LCD450	DN450	286.13-5722.65
MS-LD20	DN20	0.57-11.30	MS--LD/LCD500	DN500	353.25-7065.00
MS--LD25	DN25	0.88-17.66	MS-LD/LCD600	DN600	508.68-10173.60
MS--LD32	DN32	1.45-28.94	MS-LD/LCD700	DN700	692.37-13847.40
MS--LD40	DN40	2.26-45.22	MS--LD/LCD800	DN800	904.32-18086.40
MS--LD50	DN50	3.53-70.65	MS--LD/LCD900	DN900	1144.53-22890.60
MS--LD65	DN65	5.97-119.40	MS--LD/LCD1000	DN1000	1413.00-28260.00
MS--LD80	DN80	9.04-180.86	MS--LD/LCD1200	DN1200	2034.72-40694.40
MS--LD100	DN100	14.13-282.60	MS--LD/LCD1400	DN1400	2769.48-55389.60
MS--LD125	DN125	22.08-441.56	MS--LD/LCD1600	DN1600	3617.28-72345.60
MS--LD150	DN150	31.79-635.85	MS--LD/LCD1800	DN1800	4578.12-91562.40
MS--LD/LCD200	DN200	56.52-1130.40	MS--LD/LCD2000	DN2000	5652.00-113040.00
MS--LD/LCD250	DN250	88.31-1766.25	MS--LD/LCD2200	DN2200	6838.92-136778.40
MS--LD/LCD300	DN300	127.17-2543.40	MS--LD/LCD2400	DN2400	8138.88-162777.60
MS--LD/LCD350	DN350	173.09-3461.85	MS--LD/LCD2600	DN2600	9551.88-191037.60
MS--LD/LCD400	DN400	226.08-4521.60
		code	Electrode material
		K1	316L
		K2	HB
		K3	HC
		K4	titanium
		K5	tantalum
		K6	platinum alloy
		K7	Stainless steel coated with tungsten carbide
			code	Lining material
			C1	Polytetrafluoroethylene F4
			C2	Perfluoroethylene propylene F46
			C3	Polyfluoroethylene FS
			C4	Polyvinyl rubber
			C5	polyurethane rubber
				code	function
				E1	Level 0.3
				E2	Level 0.5
				E3	Level 1
				F1	4－20Madc, Load ≤ 750 Ω
				F2	0-3kHz, 5V active, variable pulse width, output high-end effective frequency
				F3	RS485 interface
				T1	Normal temperature type
				T2	High temperature type
				T3	Ultra high temperature type
				P1	0.6MPa
				P2	1.0MPa
				P3	1.6MPa
				P4	4.0MPa
				D1	220VAC±10％
				D2	24VDC±10％
				J1	Integrated structure
				J2	Split type structure
				J3	Explosion proof integrated structure

Installation diagram of integrated electromagnetic flowmeter product:

The main advantages of MS-LD integrated electromagnetic flowmeter are as follows:

1) The sensor structure of an electromagnetic flowmeter is simple, with no movable parts inside the measuring tube and no throttling components that hinder fluid flow. So when the fluid passes through the flowmeter, it will not cause any additional pressure loss, making it one of the flow meters with low operating energy consumption.

2) It can measure the flow rate of contaminated media, corrosive media, and suspended liquid-solid two-phase flow. This is because there are no obstructing flow components inside the instrument measuring tube, and only the inner lining and electrodes of the measuring tube are in contact with the measured fluid. The material can be selected according to the properties of the measured fluid. For example, using polytetrafluoroethylene or polytetrafluoroethylene as lining can measure various corrosive media such as acids, alkalis, salts, etc; The use of wear-resistant rubber as an inner lining is particularly suitable for measuring liquid-solid two-phase flows such as slurry and cement slurry with solid particles and high wear, as well as various suspended liquids such as fibrous liquids and pulp.

3) Electromagnetic flowmeter is a volumetric flow measurement instrument that is not affected by the temperature, viscosity, density, or conductivity (within a certain range) of the measured medium during the measurement process. Therefore, after being calibrated with water, electromagnetic flow meters can be used to measure the flow rate of other conductive liquids.

4) The output of an electromagnetic flowmeter is only proportional to the average flow velocity of the measured medium, and is independent of the flow state under symmetric distribution (laminar or turbulent). So the range of electromagnetic flow meters is extremely wide, with a measurement range of up to 100:1, and some even have an operational flow range of up to 1000:1.

5) Electromagnetic flowmeter has no mechanical inertia, sensitive response, can measure instantaneous pulsating flow, and can also measure flow in both positive and negative directions.

6) The diameter range of industrial electromagnetic flow meters is extremely wide, ranging from a few millimeters to several meters, and there are already real flow calibration equipment with a diameter of up to 3m in China, laying the foundation for the application and development of electromagnetic flow meters.

The main shortcomings of electromagnetic flow meters currently still exist as follows:

a) Cannot be used to measure gases, vapors, and liquids containing large amounts of gas.

b) It cannot be used to measure liquid media with very low conductivity, such as petroleum products or organic solvents. Currently, electromagnetic flow meters are powerless.

c) Ordinary industrial electromagnetic flow meters cannot be used to measure high-temperature media due to the limitations of measuring pipe lining materials and electrical insulation materials; Without special treatment, it cannot be used for measuring low-temperature media to prevent insulation damage caused by condensation (frost) outside the measuring tube.

d) Electromagnetic flow meters are susceptible to external electromagnetic interference.