The room temperature collector (five hole socket) is designed for collecting and monitoring indoor temperature. It is installed in the user's home and can collect the heating temperature at all times during the entire heating period. The room temperature collector has an LCD display screen that can display temperature, humidity, signal quality, fault codes, and other information to detect heating quality. This is mainly to collect the heating temperature of typical users' homes throughout the entire heating period, as well as to track the heating quality of the company's heating system, in order to adjust the system operation status in a timely manner and ensure that all users' room temperature meets the standard. The room temperature collector (five hole socket) does not require battery replacement, does not need to smash walls or dig holes, and is easy and convenient to install.

Independent temperature measurement window design, three sided ventilation, more accurate temperature measurement.

The sensor is located at a certain distance from the wall to avoid low temperatures.

Large screen design, the display screen supports temperature and humidity.

Onboard antenna, completely avoiding signal poor caused by loose antenna interface.

The front five hole panel is integrally formed without color difference.

Exquisite appearance, multiple colors to choose from, in line with modern decoration style.

Fault code display, convenient for installation and debugging.

supportFOTARemote firmware upgrade.

colour:Ivory white, earthy gold, rose gold, space silver

Installation method: eighty-sixBox fixed installation

rated voltage: 220V~50Hz

rated load: 2500W

Power supply method:Isolation and power supply[External module]

Isolation and voltage resistance: 1500VDC

communication model: NB-IOT

sensor type: T[temperature]、TH[Temperature and humidity]

Temperature range: - 30C~70°[T、THsincere]

Humidity range: 0%~100%[onlyTHsincere]

Temperature Accuracy:±0.1℃[Tsincere]/±0.2C[THsincere]

Humidity accuracy:±3%RH[onlyTHsincere]

Display Accuracy: 0.1C/1%RH

time format: twelveHourly system

protection grade: IP30

Please confirm that the home power main switch is turned off before installation!

[auxiliary word for ordinal numbers1pace:wire connection]The diagram shows the wiring diagram, with one end of the power module connected to the neutral wire and the live wire, and the other end connected to5VOutput line, connected to the backend of the room temperature collector5VInterface. The neutral wire, live wire, and ground wire of the mains power are respectively connected to the neutral wire, live wire, and ground wire interfaces of the socket.

[auxiliary word for ordinal numbers2pace:Power on detection]Turn on the main power switch, and the room temperature collector will start up normally, indicating successful power supply. Otherwise, it means power supply failure and the wiring of the circuit needs to be rechecked.

After the device is turned on, it will perform a normal self-test. After the self-test is normal, the time and temperature will be displayed. Short press the user button to quickly switch between time and temperature. No button operation, the screen will automatically turn off to reduce power consumption.

If a certain test fails, the corresponding information will be displayed on the device screen E.XX error code,The following list shows the correspondence between startup codes, error codes, and specific information.

contactway