The use of reverse osmosis membranes has significantly increased the replacement cycle of various consumables.
● Small desktop computers.
Simply connect the faucet to easily obtain JIS K 0057 A4 grade ion exchange water.
JIS K 0557 A4 water quality is suitable for high-sensitivity microanalysis.
● Adopt a digital display that is easy to operate.
Display the replacement cycle of consumables to ensure the quality of pure water.
The water intake is equipped with a membrane filter as standard.
An electromagnetic valve is installed at the water intake to prevent water leakage from the filter after the water collection is completed.
The power supply corresponds to 100-240V.
This device regularly self drains and requires drainage equipment.

Water collection process diagram

technical specifications
model |
WE200 |
|
Method and Performance |
Water collection method |
RO membrane → ion exchange → filtration |
Water supply method |
Quick plug water pipe connection, resin water pipe |
|
Water collection volume and method |
0.5-1.0L/min continuous water collection |
|
constitute |
Raw water side filtration membrane |
Pre treatment column (activated carbon+hollow membrane 0.1 μ m) |
filter |
Reverse osmosis membrane RO |
|
Ion exchange resin column |
Activated carbon 2L ion exchange resin CPC-T |
|
Final filtration |
0.1 μ m membrane filter |
|
Leakage detection |
Leakage detection, water supply solenoid valve cut-off |
|
Specifications |
Range of raw water pressure |
0.13~0.5MPa(1.3~5.0kgf/cm2) |
Range of raw water temperature |
10~30℃ |
|
Water intake |
Rc1/4 at a height of 250mm on the ground (connected to a membrane filter) |
|
Drainage outlet |
Φ 10 hard water pipe |
|
Drainage volume |
Maximum 2L/min |
|
Safety device |
Abnormal water supply, water quality sensor, controller, pressure upper/lower limit, water leakage, low flow warning, leakage protection switch |
|
Power supply (50/60Hz) |
Single phase AC100~240V below 1.3A (main power supply 10A) |
|
Dimensions and Weight |
Length 350mm x Width 430mm x Height 470mm · Approximately 30kg |
|
display |
Water quality display |
LED display (conductivity/resistance/water temperature switching) |
Other displays |
Various alarm/anomaly displays, consumables replacement notifications |
|
Accessories |
Raw water supply pipe, pre-treatment column, RO membrane (column), ion exchange column CPC-T, membrane filter, drainage pipe (Φ 10 × 3000mm), power cord, sealing tape |
Example of Water Quality Analysis Japanese industrial specifications JIS K 0557
project |
JIS K 0057 specification A4 |
WE200 |
|
Measurement value |
category |
||
Conductivity (mS/m) |
Below 0.1 |
0.0055 |
A4 |
Organic carbon (TOC) (μ gC/L) |
Below 50 |
5 |
A4 |
Zinc (μ gZn/L) |
Below 0.1 |
<0.1 |
A4 |
Organosilicon (μ gSiO2/L) |
Below 2.5 |
0.5 |
A4 |
Chloride μ gCl -/L |
Below 1 |
<0.5 |
A4 |
2- Sulfide μ g SO4/L |
Below 1 |
<1.0 |
A4 |
Overall level |
A4 |
Product Name |
Specifications |
Product Number |
Water collection rack (with connecting components) |
OWL40 |
253266 |
External alarm output terminal |
OWE10 |
253278 |
Remote water collection input terminal |
OWE12 |
253279 |
Foot switch |
OWE14 |
253280 |
Water supply port component |
OWH10 |
253686 |
consumables
Product Name |
Specifications |
Product Number |
Pre processing column |
PWF-1 |
253099 |
Reverse osmosis (RO) membrane column |
|
253257 |
Ion exchange resin column |
CPC-T |
253256 |
Membrane filter |
MFRL727 |
9020010004 |
