power plantbag-type dust collectorLow pressure difference can improve production and enhance ventilation and filtration efficiency. Stable operating pressure difference reduces fan energy consumption to varying degrees, saving compressed air for dust cleaning in power plantsbag-type dust collectorThe selection of good filter materials, combined with our company's scientific structural design, has the advantages of easy dust cleaning, low operating pressure difference, and long service life.

Power plant bag filterFeatures: The electric bag composite dust collector has the technical characteristics of high dust removal efficiency, no dust interference, can meet the operating requirements under different working conditions, low operating resistance, low dust load on the filter cartridge, small dust particle size causing less erosion on the filter cartridge, long service life of the filter cartridge, and low maintenance.Power plant bag filterIt is not a simple combination of electrostatic precipitator and bag filter, in fact, it has overcome many difficulties to integrate these two different principles of dust removal technology.

The power plant bag filter has emerged, which combines the advantages of electrostatic precipitator and bag filter, overcomes their respective shortcomings, and is a new type of power plant dust removal equipment. Our company summarizes some issues that should be noted. If the bag dust removal part of the power plant bag filter adopts a straight through air inlet, the airflow load of each filter bag in the bag chamber will be uneven, especially on the windward side of a row of filter bags, which will be directly washed away by the dusty airflow, resulting in the damage of this part of the filter bag before other filter bags. Therefore, it is particularly important to install an airflow distribution plate at the end of the electric field. A good uniform wind effect can promote the uniform filtration load of filter bags in different areas, and the amount of dust in the ash hopper tends to be balanced; It can avoid the direct flushing of a row of filter bags by dusty gases; The airflow equalizing plate can cause some coarse particles in the airflow to lose their kinetic energy and fall into the ash hopper. Based on experience, the average velocity of the airflow in the windward section of the filter bag bundle should be controlled below 0.85m/s; The average upward velocity of the airflow below the bag bundle should be less than 1.0m/s.