Guangrui Machinery SupplyPickled vegetable pasteurization machineTechnical characteristics:

1. The equipment, except for the motor and bearings, is made of stainless steel SUS304/2B material, which meets hygiene requirements.

Suitable for sterilization of vegetables, dehydrated vegetables, pickled vegetables, low-temperature meat products, jelly, dairy products and other foods. The sterilization temperature and speed can be set according to the process requirements.

2. The machine adopts SUS304 stainless steel mesh belt, which has the characteristics of high strength, low elasticity, not easy to deform, and easy maintenance. The whole machine runs in balance and has low noise, greatly improving work efficiency.

3. The heating source of this machine is steam heating, equipped with an automatic control steam inlet device, which greatly reduces energy waste.

4. The transmission system of this machine adopts a speed regulating deceleration motor, which makes the conveying speed of the conveyor belt adjustable, and the sterilization process has "arbitrariness".

Design and customize according to the actual needs of customers, welcome new and old customers to negotiate and cooperate, and we will provide equipment with a sincere attitude.

Pickled vegetable pasteurization machineusage method:
1. Connect the power supply. The equipment is three-phase four wire, with one dual color wire as the neutral wire (please have a professional connect the wires to prevent damage to the equipment)
2. Turn on the power switch, set the temperature. The process of setting the temperature is to press SET, right-click to adjust the number of digits that need to be adjusted, press the up and down keys to set the specific value, and then press the SET key once to confirm.
3. Turn on the sterilization switch, and the device will start heating up. Once the temperature reaches the set value, it will automatically stop. During operation, if the temperature drops and the temperature rises, it will automatically start working.
After the temperature reaches the set value, open the mesh belt and start running for sterilization.
5. Adjust the operating speed of the mesh belt using the frequency converter inside the electrical box. Rotate the knob clockwise to increase the speed, and vice versa to decrease the speed.
matters needing attention:
After the work is completed, the equipment should be cleaned.
2. The oil level and quality of the gearbox should be checked every month, and if necessary, the oil used for refueling or changing operations should be No. 32 engine oil.
When moving or rewiring the equipment, the direction of rotation of the motor should be confirmed. If it is reversed, any two phases of the three-phase power should be switched
4. Non professionals are prohibited from opening electrical systems.
The equipment can be designed and customized according to the actual needs of customers!