Applicable standards for boiling range analyzer: GB/T 7534-2004

Petroleum product boiling range tester

This instrument is suitable for determining the boiling range of volatile organic liquids for industrial use and organic solvents for raw materials. Equipped with suitable flasks, it can also be used for distillation determination of gasoline, aviation gasoline, jet fuel, solvents with special boiling points, naphtha, diesel, distillate fuels, and similar petroleum products.

Petroleum product boiling range tester

Technical Parameter

1. Temperature control range: 0-60 ℃ can be set arbitrarily.

2. Temperature control accuracy: ± 0.5 ℃

3. Temperature display mode: LED digital display.

4. Electric furnace heating power: 1000W

5. Measuring cylinder volume: 100 milliliters, dividing by 1 milliliter

Distillation flask: meets the requirements of GB/T7534.

7. Temperature gauge: solvent distillation temperature gauge, with a scale range of 95-255 divisions at 0.5 ℃ and 48-102 divisions at 0.2 ℃.

Electric furnace movable plate: made of silicon carbide plate, with hole diameters of φ 32 φ38。

9. Environmental temperature: 5 ℃~40 ℃ Environmental humidity: ≤ 85%

⒑ Whole machine power consumption: ≤ 2500W

⒒ Working power supply: AC220V±10%，50Hz

Instrument characteristics

1. The circuit control part is composed of a control box and integrated circuit board control, with humanization. At the same time, adding leakage protection devices to traditional technology ensures that users can use it safely and with confidence.

2. The control box is made of cold-rolled steel plate, with an observation window in front of the upper part and an electric furnace installed inside.

3. The electric furnace is composed of a silicon carbide furnace plate, 1000W/220V heating wires, and high-temperature resistant silicon carbide plates. The position of the electric furnace can be adjusted by the height adjustment knob on the control box to adjust the relative position between the distillation flask and the condenser tube. The heating power is controlled through a voltage adjustment knob.

4. The refrigeration system adopts a new type of refrigeration compressor, and the condensate tank is made of stainless steel plate. Built in heating, cooling, temperature measurement, and electric circulation. Among them, the traditional technology of motor stirring has been changed to electric circulation, which uses a circulating water pump to circulate up and down. Compared to the original motor, the stirring temperature flows uniformly and the cooling and heating effects are faster.