PTFE Tricarboxylic Acid SamplerProduct Introduction:

Product Name: Tri Acid Sampler (Polytetrafluoroethylene Tri Acid Sampler)

Specifications: 300ml, 500ml, 1000ml

Material: New polytetrafluoroethylene material, PTFE

Suitable for corrosive liquids such as nitric acid, hydrochloric acid, sulfuric acid, etc.

Standard: The three acid sampler complies with the national standard GB/T6680-2003 "General Rules for Sampling Liquid Chemical Products".

instructions:

1. Before use, check if the sampler is clean and wear acid and alkali resistant gloves and goggles.

2. Drop the sampler freely into the liquid, remove it, and transfer the sample.

3. Clean the sampler and wipe it dry with a cloth.

Product features:

1. Corrosion resistance and reasonable structural design: Liquid samples enter the sampler from the upper opening.

2. Full process samples can be collected.

3. Easy to clean (customized processing of new PTFE material with extremely low adhesion).

PTFE Tricarboxylic Acid SamplerSpecification Table:

The three acid sampler (polytetrafluoroethylene three acid sampler) is provided by Shanghai Shupei Experimental Equipment Co., Ltd., with specifications of 300ml, 500ml, and 1000ml. It is suitable for collecting corrosive liquid samples and for sampling three acidic liquids: hydrochloric acid, nitric acid, and sulfuric acid. Used in conjunction with polytetrafluoroethylene rope.