VIP member
PLC Arduino ARDBOX 20 I/Os 模拟 HF Modbus
The 20 IOS programmable logic controller provides multiple communication options for industrial solutions based on the Arduino Leonardo board- WiFi al
Product details
10 inputs (7 to 24Vdc):
Analog (0-10VDC) and digital (7)Up to 24Vdc)
10 Output (5 to 24Vdc):
Simulation (0-10VDC)Isolated from digital/PWM (5 to 24Vdc)
signal communication:
USB、RS485、RS232、 Half full duplex (Modbus), I2C, SPI
PLC Arduino ARDBOX 20 I/O Analog High Frequency Module Specification
Select pre-defined switch configuration: No predefined configuration required (default RS-485) or RS-232
Other communications：No additional communication or Wi Fi and Bluetooth or GPRS orLoraperhapsDali
Industrial Automation
20 input/output Arduino
20 input/output Arduino
Analog (0-10VDC) and digital (7)Up to 24Vdc)
10 Output (5 to 24Vdc):
Simulation (0-10VDC)Isolated from digital/PWM (5 to 24Vdc)
signal communication:
USB、RS485、RS232、 Half full duplex (Modbus), I2C, SPI
PLC Arduino ARDBOX 20 I/O Analog High Frequency Module Specification
Select pre-defined switch configuration: No predefined configuration required (default RS-485) or RS-232
Other communications：No additional communication or Wi Fi and Bluetooth or GPRS orLoraperhapsDali
Detailed information based on Arduino PLC
Industrial Automation
be based onArduinoThe PLC
It has 20 digital inputs/outputs. 10x analog or digital input (see specifications) and 10x digital or analog output (see ESPEC).
The basic controller series provides the possibility of communication between two computers using I2C to obtain master-slave connections.
Instant connection and programming
The basic controller series, as it uses Arduino LEONARDO, allows you to program through USB. This feature allows immediate access for programming, maintenance, and preparation of its settings. It allows you to have unlimited control over your device.
Standing module
Different basic controller devices are programmed in exactly the same way. After using one of them, the remaining parts can be configured using the same method.
Scalable
By using the I2C connection that all basic controller series have, up to 127 modules can be connected, which means there can be up to 2.540 inputs/outputs in the master-slave connection. Note: For I2C, you need to tell us the requirements.
Flexible and dynamic
All components are configurable, just like configuring jobs as master or slave jobs when using master-slave stations over I2C connections.
5-12-24 Vdc
Industrial equipment can be prepared for 5-12-24 Vdc power supply voltage.
Up to 58 inputs/outputs
Supports various digital, analog, PWM, and interrupt configurations.
communication protocol
USB、 Serial ports, RS232, RS485, I2C, SPI, and communication for encoding, data transmission/reception, and multiple module and sensor connections.
Industrial reliability
It complies with all regulations for industrial automation. Electromagnetic compatibility, CE, Rohs, etc
Support Arduino IDE coding
Currently, it can be programmed on the Aduino platform.
(It will also soon be possible to program and ladder based on IEC-61131 regulations)
Arduinooriginal
Original Arduino board for industrial automation series, as well as Raspberry Pi, Banana Pi, or Beehive board included in industrial panel PC series
20 input/output Arduino
PLC seriesIndustrial ARDUINO Automation
Industrial Programmable Logic Controller Based on Arduino Primitive Board
The first device based on Arduino technology, designed specifically for professional use. Monitoring, control, and automation.
- Safety and robustness. Up to 20 inputs and outputs
- Always original Aduino Leonardo board
-
Industrial Protocol
- RS232， RS485， I2C， SPI， Modbus， USB， Full half duplex
20 input/output Arduino
PLC seriesIndustrial ARDUINO Automation
Industrial Programmable Logic Controller Based on Arduino Primitive Board
The first device based on Arduino technology, designed specifically for professional use. Monitoring, control, and automation.
- Safety and robustness. Up to 20 inputs and outputs
- Always original Aduino Leonardo board
-
Industrial Protocol
- RS232， RS485， I2C， SPI， Modbus， USB， Full half duplex
Up to 20 inputs and outputs
Digital, analog, and relay
standard protocol
RTC、μSD、USB、 Full/Half Duplex RS485 RS232、I2C、Modbus
No license cost
This PLC can be programmed using the Arduino IDE platform
Industrial Aduino Co., Ltd
Industrial Automation Based on Open Source Hardware
Modular PLC
The controller is the first device designed specifically for professional use based on Arduino technology. With the PLC Arduino series, you can have up to 20I/O. It also includes multiple communication ports, which provide greater flexibility and control. The 20IOs industrial controller series can be extended to 127 modules through I2C, which means you can provide 7100 inputs/outputs in master-slave connections. In addition, sensors can also be expanded
programming software
This industrial PLC can be programmed using the Arduino IDE platform and other programming languages or interfaces.
Instantaneous connection and
The Arduino PLC 20IOs encoding controller is programmed through a USB port. This provides immediate access to programs, maintenance, and control. In addition, you can continuously monitor the status of all variables, inputs, outputs, etc. It is compatible with the Alde Box PLC series and touch pulp peel with instant connectivity.
Easy setup and installation
It complies with industrial automation regulations.
connect
Connect an external storage card or use USB to copy important data.
Choose your software
It can be programmed using multiple software platforms, mainly free platforms.
Take a look at our case studies in greenhouses, industrial machinery, and more
Industrial applications and solutions, our programmable logic controllers
casestudy
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-