This series of boilers only takes 3-5 minutes from ignition to steam generation, which is one tenth of the time required for ordinary gas-fired through flow steam boilers; Save at least 25% to 30% of fuel compared to ordinary gas-fired through flow steam boilers. Structurally, this model of boiler is a vertical structure with evenly distributed water pipes inside. The burner is placed on the top of the boiler and burns from top to bottom, using a micro positive pressure combustion method

1. Ignite for 2-4 minutes to generate steam, and sufficient pressure steam can be obtained after igniting for 2-4 minutes.
2. The safety devices and controls, combustion, steam pressure, and water level are all fully automated, ensuring safe and economical operation.
3. Good heat transfer, high-speed flow of combustion gas between water pipes. Good heat convection, fast heat attraction, and excellent heat transfer effect.
4. The operation is quiet, and the sound of the air supply fan and combustion is 5-6dB lower than that of old and similar products, even when working next to the boiler, it is not affected.
5. Efficiency of 92%~96%, excellent heat absorption effect of furnace structure, combustion heat efficiency as high as 92%~96%
6. High technology, high quality, fully automatic CO2 welding, consistent production, uniform component specifications, and reliable quality.
7. The whole machine is debugged before leaving the factory and requires no installation on site. The boiler is debugged as a whole before leaving the factory and requires no installation on site. The equipment can be used after being powered on upon arrival at the site of use.
8. The water pipe temperature test can detect the temperature of the water pipe to check whether the boiler has produced scale. If the temperature rises to the set temperature, the boiler will automatically stop running.
9. The furnace temperature detector can detect the temperature of steam and automatically shut down when the temperature exceeds the set value, ensuring the safe operation of the boiler.
10. The automatic discharge device can detect the conductivity of the concentrated boiler water. When the conductivity reaches the discharge standard, the boiler will automatically discharge the boiler water, which can stably control the quality of the boiler water and improve the quality of steam, avoiding the occurrence of caustic embrittlement and scale in the furnace body, reducing boiler efficiency, and damaging water pipes.

[Performance Comparison]