Oil bath feeder 42 model (blue)-Global supplier

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

18924378066
Address

Beizha Xifang Industrial Zone, Humen Town, Dongguan City

Contact Now

Oil bath feeder 42 model (blue)

A precision bar feeding machine that improves turning efficiency and saves labor costs for you

Contact Supplier

More Products

Product details

A precision bar feeding machine that improves turning efficiency and saves labor costs for you

Seven years of industry experienceTime witnesses quality, quality assuranceOne year warranty
Guangdong users come to install on-site,In other provinces and cities with large quantities, on-site installation is available
Installation drawings and telephone technical support can be provided for small quantities

Dongguan Beituo Electromechanical Co., Ltd. is located in Dongguan, a developed industrial area in the Pearl River Delta region of China. We specialize in CNC lathe feeders and integrate research and development, sales, and after-sales service. We can provide customers with the design and customization of various specifications of lathe feeders. Welcome to inquire!

In recent years, due to the continuous increase in workers' wages, many enterprises have encountered difficulties in recruiting workers, which has forced them to update and renovate equipment, improve the automation level of equipment, and thereby reduce labor costs. The oil bath automatic feeding machine has changed the problems of high wear and tear, high automation cost, heavy manual labor, power consumption, and waste of raw materials in traditional mechanical and heavy hammer feeding machines. This oil bath automatic feeding machine has high precision, easy operation, low working noise, stable performance, time-saving, high efficiency, and material waste saving. It truly achieves low cost investment, high return, fully automatic, and low noise. The oil bath automatic lathe feeding machine can not only be matched with various types of lathe automatic feeding equipment, but also cooperate to achieve automation of various mechanical parts processing and production processes such as feeding, cutting, and drilling. Therefore, the oil bath feeding function is widely used in various CNC lathes and has good development prospects.

Component configuration:

1. Oil brush cover	Oil return pipe interface	15. Fuel tank	22. Balance adjustment screw
2. Return oil drum	9. Pressure plate bolt	16. Foot screw
3. Fixing screws for oil return tank	10. Material machine outer pipe	17. Inspection hole
4. Oil pressure sensing interface	11. Outer pipe bracket	18. Tail fixing bolt
5. Oil inlet pipe interface	12. Height adjustment screw	19. Rear steering wheel
6. Power control box	13. Adjust the nut	20. Rear seat adjustment screw
7. Inner tube positioning hole	14. Support frame	21. Pressure regulating valve

System features:

1. The equipment is easy to operate, time-saving, efficient, structurally optimized, with low noise, few malfunctions, and long service life.

2. Adopting hydraulic propulsion design, the piston rod pushes the bar material into the lathe spindle: the rotation of the material generates hydraulic power effect, and the hydraulic support of the bar material can effectively suppress and eliminate the noise generated by vibration.

3. The processed rod rotates in an oil bath with self centering stability, and the collision between the rod and the material tube decreases with increasing rotational speed, allowing for high-speed operation.

4. The CNC lathe is equipped with an automatic feeding machine, which plays a more precise and stable role in lathe turning, reducing labor costs and improving material utilization.

Product parameters:

Product specifications	Feeding diameter (mm)	Feed length (mm)	Motor power (kw)	Pressure usage range (kgf)
26φ	18-26	≤2500	0.37	1.5-2.0
18φ	5-18	≤2500	0.37	1.5-2.0

model	Model	BT-65 customization	Standard configuration	One set of hydraulic system (including electrical control box)
bar diameter	Bar diameter	Φ5-65mm		Two pillars
bar length	Max bar length	2.5/1.5 meters		Storage tube diameter: 18mm, 26mm, 36mm, 46mm, 65mm
Length * Width * Height	LWH	2600 * 700 * height		Motor: 380V; 0.75KW

Product specifications:

Product specifications	Feeding diameter (mm)	Feed length (mm)	Motor power (kw)	Pressure usage range (kgf)
65φ	≤65	≤1500	0.75	1.5-2.0
46φ	≤46	≤2500	0.75	1.5-2.0
36φ	≤36	≤2500	0.75	1.5-2.0
26φ	≤26	≤2500	0.75	1.5-2.0
18φ	≤18	≤2500	0.75	1.5-2.0

The oil bath feeding machine consists of five parts: hydraulic station, feeding tube, pushing rod, bracket, control circuit, etc. The principle is that the oil pump supplies oil to the feeding tube at a constant pressure (0.1-0.2Mpa), and pushes the piston rod (pushing rod) to push the bar material into the main shaft, so it is also called an oil pressure feeding machine. When working, the rod material is in the hydraulic oil of the material tube. When the rod material rotates, it will float up from the material tube under the damping reaction stress of the oil. When the speed is fast, the rod material will automatically suspend and rotate in the center of the material tube. Greatly reduce the collision and friction between the small rod material and the feeding pipe wall. The vibration and noise during work are very small, especially suitable for high-speed, long bar materials, and precision workpiece processing.
The oil bath feeding machine, which is increasingly widely used both domestically and internationally, can be matched with various processing machine tools to complete automatic feeding work. After the bar material is automatically fed, the machine tool is automatically in a waiting state and informs the operator of the feeding through a warning device.

The new generation of oil bath feeder has further improved its practicality and safety reliability, and has also made a series of technological improvements, optimizing the material selection, connection structure, exhaust device, filtration device, and push rod rotation device of the body components. This solves various common problems of oil bath feeders, such as vibration, leakage, oil circuit blockage caused by the feeding of the machine body, and jumping caused by the deformation of the contact end between the push rod and the processed material due to long-term rotation of the processed material.

Pursuing simple operations, completing them with just one click

Heavy hammer type simple feeding machine

1. Unstable feeding, inaccurate feeding, loud noise, material wear, and long tail material.
2. Small feeding range: mmm-26mm， Suitable for low-speed machining.
3. Simple structure, affordable price, and easy maintenance.
4.1500/unit, low investment cost, high workshop noise, employee has resigned.

Oil film feeder

1. Stable and precise feeding.
2. Low noise and no material wear.
3. Short tail material.
4. Large feeding range: 5mm-45mm
5. Suitable for high-speed machining.
6. The structure is complex and the price is expensive.
7. Complex professional maintenance is required.
8.48000 yuan/unit, high investment cost, low workshop noise, employees like to work, employees need professional training to operate.

Oil bath feeder

1. Integrated with electro-hydraulic linkage, the oil bath feeder is a lathe feeder with a hydraulic system as its core, mainly composed of a hydraulic station and a bar feeding pipe. The hydraulic station provides working power, the piston rod pushes the material forward, and the feeding pipe serves as the feeding channel.
2. This machine is suitable for various automatic lathes and CNC lathe models
3. Replacing the lathe only takes 3 seconds.
4. Processing rod diameter 4MM-46MM, length 50MM-3000mm
5. Can ensure any machining accuracy
6. Residual materials are pushed out from the front and equipped with anti-collision knife devices
7. The diameter and length of the rod can be adjusted arbitrarily
8. Simple structure, flexible operation, long service life, body length of about 3900mm
9. This feeding machine can be equipped with a CNC lathe to feed long bar materials for processing, and can also be used for post positioning, with an accuracy guarantee of within 0.03mm.
10. During the processing of long materials, avoid the occurrence of twisted materials, scrap materials, and ensure that there are no worn materials.
11. Automatic feeding of long bar materials is also suitable for automatic lathes and CNC lathes, which can completely replace manual feeding and processing of table lathes and instrument lathes. It has fast speed, high processing accuracy, and saves a lot of labor.

Over the course of seven years, we have found that using a vertical combination of motors and oil pumps is more durable, stable, and long-lasting. Some manufacturers, in order to reduce costs, choose a horizontal combination, and when using a small amount of overflow valve, it is prone to adverse phenomena such as unstable feeding.

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content