Guangxi Xintian Intelligent Technology Co., Ltd
Home>Products>Non contact IC card tiered water price meter
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    13277804090
  • Address
    1st and 2nd floors, Office Area 106, Building 6, Hanlin Yujing, No. 9 Daxue East Road, Xixiangtang District, Nanning City
Contact Now
Non contact IC card tiered water price meter
Non contact IC card tiered water price meter
Product details

◆ Instructions for use
The tiered water price meter is suitable for charging different prices based on the monthly water consumption of users.
This product can set two boundary points for water volume and three types of charging water prices. When the user's monthly water usage does not exceed the boundary point, water fees can be charged at the normal water price. When it exceeds the boundary point 1, water fees will be charged at a higher water price. When the monthly water usage exceeds the boundary point 2, water fees will be charged at a higher water price. This reasonably limits the user's water usage and achieves the goal of saving water and avoiding water resource waste.
One household, one meter, one card. Use the card to use water, and record the water consumption in their respective cards. After the quantity in the table is used up, the meter will automatically close the valve and stop the water supply. Users need to purchase water again before they can open the valve again to supply water.

Characteristics of lithium battery series tiered water price meter
1. By adopting non-contact IC card technology and transmitting data wirelessly, the challenges of waterproofing, moisture resistance, and attack prevention have been solved.
2. Zero power technology: The normal power consumption is basically 0 μ A, which greatly improves the service life of the internal battery, with a service life of more than 6 years.
3. Electric suspension ball valve technology: It has the characteristics of anti lock and non scaling, and can achieve the effects of low pressure loss, low wear, low power consumption, rust prevention, and anti blockage.
4. Valve automatic drainage, anti blocking, and anti rust technology: The valve automatically switches on and off at regular intervals, effectively utilizing the instantaneous water impulse caused by pipeline pressure to achieve automatic drainage of the valve, avoiding phenomena such as valve rust and scaling.
5. Fully sealed design: All circuits are sealed with epoxy resin for good sealing performance.
6. Anti external electric and magnetic attack technology: When subjected to strong electric and magnetic attacks from the outside, the water meter will automatically close the valve.
◆ Partial technical parameters

project
FS-15E water meter
FS-20E water meter
FS-25E water meter
Water meter performance
B-level table
tightness
1.6MPa water pressure, no leakage within 15 minutes
length
165mm
195mm
225mm
Overload flow
3m3/h
5m3/h
7m3/h
Common traffic
1.5m3/h
2.5m3/h
3.5m3/h
Boundary flow rate
0.12m3/h
0.2m3/h
0.3m3/h
Minimum flow rate
0.03m3/h
0.05m3/h
0.07m3/h
Start flow rate
≤0.010m3/h
≤0.012m3/h
0.017m3/h
MINIMUM READING
0.0001m3
Maximum reading
9999.9999m3
User stealing water
Automatically close the valve and prompt
Power supply and service life
Lithium batteries have a lifespan of over 6 years
Confidentiality of IC Cards
RF card, one meter, one card, non replicable
IC card lifespan
Usage>100000 times
Alarm method
Remaining water quantity 2m3, valve closing alarm
Quiescent current
0μA
Small traffic error
≤5%
Common flow error
≤2%
operation temperature
Temperature: 0 ℃ -40 ℃ (FS series)
Working water pressure
0.01-1.0MPa
Caliber (DN)
15mm
20mm
25mm
material
copper
weight
1.2Kg
1.5Kg
2.4Kg

Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!