VIP member
Miccra online circulating (homogeneous) working chamber
Miccra (formerly ART) online circulation (homogenization) working chamber DFK, the circulation system makes rapid and efficient product development po
Product details
Miccra (formerly ART) online circulating (homogeneous) working chamber DFK
The circulatory system enables rapid and efficient product development. Similarly, modular rotors for all batch series/All stator components can be applied here.
This is the first time, it can be usedMICCRABatch structure of laboratory series.
Flexible use of quick clamps to connect various types of pipes, gaskets, containers (single-layer, double-layer, sealed, open), and valves to the system, and simulate production with small sample experiments.
Mechanical systems can also be utilized to obtain the precision of nanoscale samples. What has been accumulated is only applicable to future pilot or mass production.
|
|
|
This is a flexible solution provided for short-term continuous work. Our standard laboratory homogenizerMICCRA D-15orMICCRA D-9The host can achieve it. |
This is a circulating chamber system suitable for continuous operation in laboratories or intermediate laboratories. givehostMICCRA D-27The connection, you will receiveNano level results.
|
|
“MICCRA DFK Lab'Easy and fast cleaning, it is an efficient circulation chamber system for laboratory processing of small samples.
Based on superior modular design, all batches and series of rotors/Stator components can be applied to circulatory systems. Due to the extraordinary high rotational speed, the precision of the sample can reach40nm(depending on the characteristics and application of the sample).
So far, no other system has achieved such an effect with such a small system. |
|
“DFK'The working chamber system can be processed online in the laboratory or laboratory experiments/Large capacity of circulation. The high-quality stainless steel solid components and wear-resistant sealing materials ensure its various applications in the industrial field. n chemistry/Flow ability due to changes in physical properties n Prescription creation n Cost savings in handling small samples in the research field Transitioning from laboratory to future mass production |
Sealing type
You can choose a single mechanical seal andFDACertified lip seal.
The suspended box structure makes the lip seal easy to clean and convenient for users to replace. Repair work saves money and time. |
|
|
|
Flexible combination of stators of different sizes/rotor
|
Innovative box seal structure allows for quick replacement of lip seals |
|
|
|
Easy cleaning and maintenance |
Highly polished blade components |
Attachment: Stainless steel cups with different capacities（1，3perhaps5There are single-layer and double-layer structures available; Hose fittings, gaskets, and three-way valves, etc
Technical Parameter
DFK 1.0
Knife head kit |
20mm |
30mm |
Circulation volume (water): |
15ml/min |
26ml/min |
Maximum cutting speed: |
30 m/s |
41 m/s |
Rotor diameter: |
15mm |
23mm |
Stator diameter: |
20mm |
30mm |
Moh hardness: |
Maximum 6 |
Maximum 6 |
Maximum pressure: |
8 Bar |
8 Bar |
Vacuum degree: |
1 mbar |
1 mbar |
Sterilization and decontamination: |
CIP |
CIP |
DFK 1.4
Knife head kit |
20mm |
30mm |
40mm |
Circulation volume (water): |
10ml/min |
26ml/min |
45ml/min |
Maximum cutting speed: |
30 m/s |
41 m/s |
46 m/s |
Rotor diameter: |
15mm |
23mm |
36.3mm |
Stator diameter: |
20mm |
30mm |
40mm |
Moh hardness: |
Maximum 6 |
Maximum 6 |
Maximum 6 |
Maximum pressure: |
16 Bar |
16 Bar |
16 Bar |
Vacuum degree: |
1 mbar |
1 mbar |
1 mbar |
Sterilization and decontamination: |
CIP |
CIP |
CIP |
Product optimization
DFK 1.4 is a solution for developing a small-scale cyclic system. The host based on MICCRA D-27 has a power of 2.7W and a speed of 36000 revolutions per minute, which can more efficiently obtain higher quality samples.
The experimental results can be obtained repeatedly at any time and can be extended to larger processing capacities in the future
The refinement of mixing and samples is obtained by optimizing the combination of different rotors/stators.
Due to the bearingless rotating shaft between the circulation chamber and the motor drive, the system is very smooth and particularly easy to clean and maintain.
The ideal solution for short-term continuous work
The DFK 1.0 cycle system enables rapid and efficient product development. Similarly, modular rotor/stator components from all batch series can be applied here.
This is the first time that the batch structure of the MICCRA laboratory series can be used
Flexible use of quick clamps to connect various types of pipes, gaskets, containers (single-layer, double-layer, sealed, open type), valves to the system, and simulate production with small sample experiments.
Mechanical systems can also be utilized to obtain the precision of nanoscale samples. The accumulated knowledge can be applied to future pilot or mass production
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-