Metal fiber laser marking machine-Global supplier

Tianxiong Laser, 1st Floor, Poly Industrial Park, No. 10 Huiyuan Road, Wangniudun Town, Dongguan City

Introduction to Metal Fiber Laser Marking Machine Models

The metal fiber laser marking machine is mainly used for laser marking and engraving of metal materials. The metal fiber laser marking machine is divided into 20 watts, 30 watts, 60 watts, 100 watts, etc. according to the laser power. Among them, 20 watts is more commonly used, and users with depth requirements can choose 60 watts or more. The metal fiber laser marking machine has no optical pollution and power coupling, air cooling, high efficiency, 100000 long life, and low maintenance. It is a new generation laser marking machine system made by our company using advanced laser technology today. The metal fiber laser marking machine uses a fiber laser to output laser, and then achieves marking function through a high-speed scanning mirror system. The electro-optical conversion efficiency of the metal fiber laser marking machine is high, and it is cooled by air cooling. The whole machine is compact in size, with good output beam quality and high reliability.

Characteristics of Metal Fiber Laser Marking Machine Models

The metal fiber laser marking machine uses a high-energy laser beam to instantly vaporize the surface of an object. The marking process does not produce any mechanical compression or stress, does not corrode, has no tool wear, toxicity, or pollution. The metal fiber laser marking machine is mainly made of a large machine panel, and laser engraving for larger products is also not a problem. The machine is made of double-layer thickened 1.5 sheet metal, which greatly improves the load-bearing capacity. Long term use of heavy objects will not cause the machine to deform. The metal fiber laser marking machine also uses the unique guiding characteristics of optical fibers to transmit the LD light source to the laser isolator through the transmission of optical fibers. After beam expansion and amplification, the output laser beam quality is more than 4 times superior to old-fashioned semiconductor lasers

Structural analysis of metal fiber laser marking machine

Parameter Table of Metal Fiber Laser Marking Machine

average output power	20W	30W	60W	100W	120W
wavelength	1064nm
Pulse width/Q frequency	Pulse width adjustable from 1ns-400ns/1KHz-2000KHz
Full power frequency range	25-400KHz	25KHz-400KHz	50KHz-400KHz	67KHz-1000KHz	80KHz-1000KHz
Marking format	110 × 110mm optional (70x70mm 150x150mm 200x200mm 300x300mm)
repeatability	＜30? μrad
Carving line speed	≤7000mm/s
Minimum line width	0.01mm	0.01mm	0.03mm	0.03mm	0.03mm
Minimum character height	0.2mm		0.04mm
Cooling method	forced air cooling
Overall dimensions (L * W * H)	800mm×680mm×1200mm
power supply	AC 220V 50KHz
upgradeable	Electric lifting manual two-dimensional worktable, electric two-dimensional table rotating fixture, red light focusing

Application scope of metal fiber laser marking machine

The metal fiber laser marking machine is mainly used for all metal objects and some non-metal objects, with main application areas including packaging materials and electronic components. Hardware tools, jewelry, electronic communication, IC chips, automotive and motorcycle parts and other industries, suitable for: high hard alloys, oxides, electroplating materials, etc, ABS， Epoxy resin, engineering plastics and other materials

After sales service of metal fiber laser marking machine

Delivery list of metal fiber laser marking machine: delivery note, metal adjustment plate, tool set, training service list;
After sales and service of metal fiber laser marking machine: home delivery, technical engineers on-site installation, debugging and training, lifelong technical support, lifelong software free upgrade, 2-hour response after sales, on-site processing within 24 hours, after-sales phone: 400-829-6628