Manual surface grinderM250

workbench Table size (width)*Length: mm 250 * 500

Larger grinding size (width)*Length * Height) mm 260 * 560 * 350

Longitudinal travel of workbenchmm 550

workbenchT-shaped groove (number of grooves * groove width) mm 1 * 14

grinding head The distance between the centerline of the grinding wheel shaft and the worktable is relatively largemm 420

Vertical feed handwheel feed rate Handwheel rotates every timemm 1.25

Handwheel per gridmm 0.01

Horizontal feed handwheel feed rate Handwheel rotates every timemm 2.5

Handwheel per gridmm 0.02

Wheel shaft speedr/min 2850

Grinding wheel size (outer diameter)*Width * Inner diameter mm Ø 200 * 20 * Ø 31.75

Work accuracy Parallelism of the machined surface to the base surfacemm 300: ±0.005

surface roughnessμm Ra0.63

machine tool weight Net weightkg 950

gross weightkg 1000

Total power of electric motorkw 1.54

Electric power of grinding headkw 1.1

Dimensions (length)*Width * Height) mm 1700 * 1300 * 1800

QLCT fully connected machine tool warm reminder: Due to continuous design improvement, the above machine tool technical parameters are for reference only. If there are any changes in paint color, we will not notify you separately. We apologize for any inconvenience caused and thank you for your cooperation!