Product Introduction:

World patented technology product that can continuously remove 100% liquid water and 99% oil mist without the need for a cold dryer, providing you with clean and dry air Suitable for processing equipment, printing equipment, spraying equipment, packaging equipment, food processing equipment, and other equipment that requires air purification

Features: 1. Filter out 100% of 5-micron particles and 95% of 1-micron particles

2. Working pressure 0.3-1.7Mpa, displacement 0.75-12 cubic meters per minute

3. Equipped with an automatic drainage valve, the accumulated water can be automatically discharged

4. Small size, space saving, easy to install and use, suitable for terminal processing

5. Product model: M-105A,M-107A,M-110A,M-120A,M-140A,M-160A,M-180A

Technical parameter table:

Product features:
1. Built in automatic drain valve
The independent sink design enables the automatic drainage valve to achieve the best drainage effect
2. Two stage filtration system
The first filter element is interwoven with stainless steel mesh, while the second filter element is interwoven with stainless steel wire and cotton fibers
3. Excellent durability and cooling effect
The excellent thermal conductivity of the aluminum shell helps to cool compressed air and improve the removal effect of oil and water
4. Compact structure, saving space
No need for additional pre filtration, compact structure, integrating the functions of filtering water, oil, and dust into one, with tight connections between components?
5. Quick and convenient replacement of filter element
Scientific and rational design makes filter replacement faster and easier.
6. Product model M-103A M-105A M-107A M-100A M-120A M-140A M-160A M-180A M-195A Interface diameter 1/4 "3/8" 1/2 "3/4" 1 "1-1/4" 1=-1/2 "2" 4 "flange Fluid medium Compressed Air Only Minimum working pressure 3 bar (0.3 Mpa) Maximum working pressure 10 bar (0.99Mpa) Flow rate (m3/min) 0.30.811.5367.51256 Temperature range -20 ℃ to+60 ℃ Filtration accuracy 5 um (5PPM w/w) Shell material Aluminum shell Shell gas hole sealing Immersion shell treatment Corrosion and oxidation resistance net weight (kg) 0.41.11.11.112.55.812.913.228.265 Structure and function:
Working principle: When the air in the pipeline cools down, condensation begins to occur, and liquid water flows along the pipeline. Once it flows into the La Man dryer/filter, a series of phenomena will occur. Firstly, the condensation effect, where the condenser or first stage filter element (stainless steel mesh) causes water and air to change direction. This change causes various water droplets to combine with each other and gather in the condenser. The water droplets gradually grow larger and combine with other larger pollutants to flow into the central area of the reservoir under the action of gravity. Water containing pollutants flows along the bottom and is discharged through the automatic drainage valve in the drainage pool; A large amount of water (estimated to be 95% of water) is discharged through this process. The second filtration process passes through the second filter element - cotton fiber mesh. Change the direction of the airflow in or near the cotton fiber rope and rotate the airflow. This cotton fiber rope is supported by a stainless steel mesh, forming a vortex. At this moment, the air is accelerated dozens of times, and the center of the vortex becomes a vacuum like a tornado. So, the water droplets that were not removed by the first filter are vaporized into gas that has no adverse effects on the machine. And tiny impure oil droplets are also removed here.
Due to this principle, dry and clean compressed air free of impurities, oil droplets, and water droplets can be obtained, protecting pneumatic machines and preventing freezing.
The La Man automatic drain valve works in the cold winter (minus 30 degrees Celsius), and the plug valve is opened to release water droplets after work, thereby preventing freezing in cold areas. Manual drainage is to ensure that there is no freezing phenomenon when starting up in the morning, and it is usually not necessary.