Laboratory stirred high-temperature and high-pressure reactor for hydrogenationIt belongs to a stirring device in chemical production, which is composed of a kettle body, a power transmission shaft, and a magnetic transmission part in the middle. The kettle body is vertically equipped with a stirring shaft, and the upper power transmission shaft is connected to the magnetic outer rotor. The stirring shaft is connected to the magnetic inner rotor, and there is an isolation sleeve between the inner and outer rotors. The isolation sleeve is fixed to the kettle body as a whole, and the magnetic transmission part replaces the dynamic seal with a static seal. The entire device is organically combined together. Advantages: High transmission efficiency, low energy consumption, non-contact transmission for the two mixing parts, low noise, reliable in flammable and explosive production.

Laboratory stirred high-temperature and high-pressure reactor for hydrogenationSuitable for laboratories in colleges, research institutes, and enterprises, used for conducting experiments under low dosage, high temperature, high pressure, hydrogenation, and other conditions. Its fast and convenient operation characteristics are deeply loved by everyone.

It has the characteristics of high stirring torque, static sealing, no leakage, high temperature resistance, high pressure, high vacuum, high stirring speed, smooth operation, low noise, wide applicability, simple use, and easy operation. It is an ideal device for various industries to produce and conduct various stirring reactions in pilot tests. The shaft sleeve of the magnetic coupler is made of self-lubricating materials such as graphite, ceramic, PTFE filled carbon fiber, etc., which are suitable for stirring reactions of various materials under different reaction conditions. For example: gas-liquid reaction, gas-liquid solid reaction, liquid-solid reaction, etc. There are two types of discharge methods: top discharge and bottom discharge, which are available for users to choose from when placing orders.

Beijing Wuzhou DingchuangLaboratory mixing high-pressure reactorcharacteristic:
1. Opening the kettle lid: It requires twisting off the nuts one by one, which is laborious and labor-intensive. And for quick opening of the kettle, a clamp ring and corresponding bolts are used to press and tighten it. When opening, simply loosen each top thread a few times to remove the clamp ring, achieving quick opening of the kettle lid.
2. Material retrieval of magnetic high-pressure reaction kettle: For the ordinary type, the kettle cover is manually removed with both hands, and then the kettle body is lifted and flipped over before the material can be poured out. The quick opening kettle uses a hand cranked screw, which can easily lift the kettle lid and rotate it 90 degrees, making room for operation of the kettle body. Then use the worm gear on the hand cranked column to drive the worm wheel and flip the kettle body 135 degrees for material pouring.
3. The heating furnace can be installed and removed freely. It only takes 2 seconds to go up and down. The kettle can be cooled in air, which shortens the reaction process time.

Beijing Wuzhou DingchuangLaboratory mixing high-pressure reactorThe operating pressure of a conventional standard laboratory high-pressure reactor is 9.8Mpa, the stirring speed is adjustable from 20-750r/min, the working temperature is 300 ℃, the main contact material material is 1Cr18Ni9Ti stainless steel, the stirring blade is in the form of a propeller, and the motor is a regular DC motor; Conventional kettle lid opening: gas phase port with needle valve (for inlet, exhaust, and vacuum extraction), liquid phase port with needle valve and bottom tube inserted into the kettle (for sampling or feeding during the reaction process), feeding port with screw plug, temperature measurement and control port with protective tube and platinum resistor, pressure gauge with pressure gauge and explosion-proof device, cooling coil inlet and outlet with water nozzle inside the kettle; If the user has special requirements for the main materials of the reaction vessel (1Cr18Ni9Ti (321), 00Cr17Ni14MO2 (316L), 0Cr18Ni9 (304), Ni nickel, titanium and titanium alloys, tantalum, zirconium, Hastelloy alloy, PTFE lining, etc.), the opening of the vessel cover, internal structure, pressure level, heating method, stirring blades, and the addition of other auxiliary devices (such as condensation reflux device, constant pressure feeding tank, receiving device, condenser, etc.), they can be processed and manufactured according to the user's requirements.

Wuzhou Dingchuang (Beijing) Technology Co., Ltd. is a professional company engaged in the research, development, sales, and service of scientific instruments and laboratory equipmentA professional company. Since its establishment, the company has continuously absorbed advanced foreign experience and independently developed and designed laboratory instruments and equipment with advanced levels. All products have and have obtained multiple.

The main products include laboratory high-throughput tissue grinders, powder crushers, screening machines, microreactors, high-pressure reactors, magnetic reactors, laboratory reactors, and system integration devices. Our products are widely used in experimental analysis, testing, and inspection technology related fields in industries such as environmental monitoring, biopharmaceuticals, petrochemicals, and materials metallurgy. We are not only committed to providing users with high-quality products, but also committed to providing users with high-quality pre-sales technical consultation and after-sales technical services, and offering users a scientific and detailed set of laboratory solutions