VIP member
Product details
Machine tool features:
LPT type CNC pipe lathe system is a fully functional CNC pipe threading lathe with dual coordinate and two axis linkage (LPT36T is a three coordinate and three-axis linkage) and semi closed loop control. The host adopts a horizontal integral bed base, 45 ° inclined rectangular guide rails, and plastic guide plates are attached to the bed saddle and sliding surface. The friction coefficient is small, the dynamic characteristics are good, the rigidity is strong, the chip removal performance is excellent, the waterproofing is tight, and the operation is convenient. The whole machine embodies the design concept of modularity, high performance, and high stability.
|
|
|
LPT10 |
LPT15L |
LPT15 |
LPT20L |
LPT20 |
LPT36T |
LPT36 |
|
|
Swing over bed |
mm |
Φ630 |
Φ630 |
Φ680 |
Φ680 |
Φ820 |
Φ1050 |
Φ1050 |
|
|
Maximum rotation diameter on the saddle sliding body |
mm |
Φ440 |
Φ440 |
Φ460 |
Φ460 |
Φ640 |
Φ450 |
Φ450 |
|
|
Maximum turning diameter (pipe fittings) |
mm |
Φ115 |
Φ140 |
Φ140 |
Φ200 |
Φ200 |
＜Φ360 |
＜Φ360 |
|
|
Maximum turning length |
mm |
500 |
360 |
920 |
920 |
1250 |
450 |
500 |
|
|
X/Z maximum travel |
mm |
330/750 |
330/550 |
350/1140 |
350/1140 |
460/1740 |
210, 150/500 |
300/540 |
|
|
HEADSTOCK |
Range of spindle speed |
r/min |
25-1200 |
20-800 |
20-800 |
20-550 |
20-550 |
20-300 |
20-300 |
|
Basic spindle speed |
r/min |
340 |
Low: 192; Height: 400 |
Low: 192; Height: 400 |
Low: 105; Height: 220 |
Low: 90; Height: 190 |
150 |
150 |
|
|
Spindle centering, axial force taper |
mm |
14° 15' |
14° 15' |
14° 15' |
14° 15' |
14° 15' |
cylinder |
cylinder |
|
|
Conical hole taper |
the metric system |
140 |
160 |
160 |
228(1:20) |
233(1:20) |
1:20 |
1:20 |
|
|
spindle bore |
mm |
Φ120 |
Φ150 |
Φ150 |
Φ220 |
Φ225 |
Φ375 |
Φ375 |
|
|
Main shaft front journal |
|
Φ180 |
Φ200 |
Φ200 |
Φ300 |
Φ300 |
Φ460 |
Φ460 |
|
|
Spindle head model |
|
A2-11 |
A2-11 |
A2-11 |
A2-15 |
A2-15 |
cylinder |
cylinder |
|
|
Height from spindle center to bed surface |
mm |
360 |
360 |
360 |
360 |
455 |
580 |
580 |
|
|
Height from spindle center to ground |
mm |
1050 |
1050 |
1060 |
1060 |
1200 |
1450 |
1450 |
|
|
Feed rate and pitch range |
Fast forward speed |
m/min |
10/12 |
10/12 |
9/13 |
9/13 |
12/12 |
12/12 |
12/12 |
|
Work speed |
mm/min |
0.001-2400/0.001-2400 |
0.001-2400/0.001-2400 |
0.001-2400/0.001-2400 |
0.001-2400/0.001-2400 |
0.001-2400/0.001-2400 |
0.001-2400/0.001-2400 |
0.001-2400/0.001-2400 |
|
|
Thread Type |
|
API 5B, 5CT and other oil pipe threads, long and short circular threads, and trapezoidal threads |
|||||||
|
cutter head |
Drive mode |
|
electric |
electric |
electric |
hydraulic pressure |
hydraulic pressure |
Electric/fixed knife holder |
electric |
|
Number of knife positions |
grasp |
8 |
8 |
8 |
8 |
12 |
8/1 |
8 |
|
|
Square size of outer circular blade |
mm |
32×25 |
32×32 |
32×32 |
32×32 |
32×32 |
Fix the cutting tool in the form of a tool holder |
32×32 |
|
|
Maximum boring bar diameter |
mm |
Φ50 |
Φ50 |
Φ60 |
Φ60 |
Φ80 |
not have |
not have |
|
|
Maximum turning diameter of the blade tip |
mm |
Φ500 |
Φ500 |
Φ520 |
Φ570 |
Φ640 |
Φ620 |
Φ500 |
|
|
clamp |
Drive mode |
|
aerodynamic |
aerodynamic |
aerodynamic |
aerodynamic |
aerodynamic |
aerodynamic |
aerodynamic |
|
Specification of through-hole chuck |
mm |
Through hole Φ 115 |
Through hole Φ 160 |
Through hole Φ 160 |
Through hole Φ 230 |
Through hole Φ 230 |
Through hole Φ 375 |
Through hole Φ 355 |
|
|
Numerical Control System |
|
FANUC 0i-mate-TD |
FANUC 0i-TD |
FANUC 0i-TD |
FANUC 0i-TD |
FANUC 0i-TD |
FANUC 0i-TD |
SIEMENS 802 DSL |
|
|
Machine tool dimensions (with chip conveyor) (L × W × H) |
mm |
4935×1860×1910 |
4845×1860×1910 |
5920×1950×2065 |
5960×1950×2065 |
6050×2822×2340 |
6080×3460×2875 |
6080×3460×2875 |
|
|
Machine weight |
net weight |
kg |
7000 |
8000 |
12500 |
13500 |
21000 |
25500 |
25000 |
|
gross weight |
kg |
8000 |
9100 |
13500 |
14500 |
22500 |
26500 |
26000 |
|
|
|
|
|
|
|
|
|
|
||
|
Note: Other CNC systems such as Siemens, Fanuc, etc. can be optionally configured according to customer requirements; At the same time, other cutting platforms can also be selected, such as electric cutting platforms and hydraulic cutting platforms. |
|||||||||
|
According to different configuration changes and user specific requirements, we provide products with special functions or personalized features, and can also be configured as turning center products. Technical parameters are provided separately. Please feel free to request. |
|||||||||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-