■ Product use: Widely used in petrochemical products, food, daily necessities, pharmaceuticals, pesticides, cosmetics, solvents and other gases
Liquid and solid products.
Applicable standards: GB/T623, SH/T1144, SH/T0086, SH/T1612, GB/T606, etc.
■ Functional features:
Principle of this instrument: The moisture in the sample reduces the elemental iodine in the equilibrium solution, and the dropped cartridge reagent replenishes the iodine in the equilibrium solution
Iodine element, the volume of the consumed reagent multiplied by the titration degree of the reagent, is used to calculate the water content and water concentration in the sample.
This instrument adopts a fully enclosed design, which can automatically change the solvent (discharge waste liquid, suck in solution) as long as the phase key is pressed,
Avoiding contact between toxic chemical reagents and the human body. Provide a safe and non-toxic working environment.
◇ Full Chinese display, simple operation, high degree of automation.
The instrument automatically completes sample measurement and prints reports, with a real-time monitoring system that automatically deducts trace amounts of water that may have entered the measuring pool
To ensure accurate results. The measurement results have high accuracy and good reproducibility.
The instrument system is highly enclosed, and the titration drift value is extremely low, reaching (5UI/MIN, H20). It can accurately measure trace amounts of moisture.
◇ Can detect liquid, solid, gas, and paste samples.
■ Technical parameters:
Resolution: 1 Μ A
Titration rate: 0.5MI/s
Reproducibility: ± 0.02
The result shows unit:% PPM MG
Titration * * * small feed rate: 0.00125ML
Small detectable amount: 0.01MG
Instrument usage environmental conditions: ambient temperature of 15-30 ℃, humidity ≤ 85%
Power supply voltage: AC220V， 50HZ
Dimensions: 340 × 400 × 450MM (length × width × height)