Product Details

1、 Product Introduction

The LC series elliptical gear flowmeter is a precision instrument used to measure liquid flow rate. A direct reading cumulative instrument is a volumetric flowmeter that measures the total flow rate of liquid flowing through a pipeline. The elliptical gear flowmeter can be equipped with two counting mechanisms: mechanical display head and electronic display head. The display head has the functions of displaying cumulative flow rate, instantaneous flow rate, and zero return, which can achieve on-site display and remote control.

2、 Product features:

1. High measurement accuracy: 0.2 and 0.5 levels;

2. Simple, sturdy, and reliable in operation;

3. Especially suitable for measuring media with high viscosity, and insensitive to changes in the viscosity of the measured liquid;

4. Easy to install. There is no need for a straight pipe section before and after the flowmeter, even if the flowmeter is close to the valve, bend pipe, shrink pipe, or expansion pipe, there is no need to install a straight pipe section.

5. LC-a type cast iron elliptical gear flowmeter is widely used for measuring various oil products and non corrosive liquid media of cast iron

6. LC-e type cast steel elliptical gear flowmeter, used for measuring high-pressure and low corrosive media

7. LC-b is widely used for the measurement of highly corrosive liquid media, such as acids, bases, salts, and organic compounds

8. To prevent the gears of the flowmeter from getting stuck by impurities, a filter must be installed upstream of the flowmeter

9. Explosion proof grade: ExiaICT6

3、 Technical parameters:

1. Ordinary elliptical gear flowmeter: shell material: cast iron shell, elliptical gear material: aluminum magnesium alloy

In the field of ultra small flow measurement, compared with other types of volumetric flowmeters, the micro elliptical gear flowmeter has the following advantages:

Capable of measuring even smaller amounts of flow

lower price

Less prone to wear and tear

Lower liquid filtration requirements

Can be easily disassembled, cleaned, and assembled on site

Technical Specifications:

Material: All liquid receiving parts are made of 316L stainless steel (alumina) and fluororubber

Explosion proof: intrinsic safety explosion-proof

Range: LCZ-4:1-250 milliliters per minute; LCZ-20 5-1250 mL/MIN

Accuracy: 0.5%

Repeatability: 0.1%

Output signal: 0-5V square wave signal

High working pressure: 21Mpa (customized pressure can reach 147Mpa)

Large pressure difference: LCZ-4:34Kpa;

Medium viscosity: It is recommended not to exceed 25CP

Pulse equivalent: LFM-MTD4: approximately 50 pulses per milliliter;

Temperature range: -40 ℃ to 80 ℃

Power supply: 12V

Interface: 1/4 inch threaded connection (M14 * 1.5)

Electrical connection: M12 * 1.5

• Customized processing: Yes

• Type: Mechanical volumetric type

• Measurement range: 1-99999

• Accuracy level: 0.5 level

• Nominal diameter: 4-350mm

• Applicable medium: liquid

• Work pressure: 0-3.2MPa

• Working temperature: 0-120

•