The characteristics of the JQ type clamp shell coupling (HG5-213-65) vertical clamp shell coupling are similar to those of the clamp shell coupling, with a simple structure and easy assembly and disassembly. It is suitable for low-speed (maximum circumferential velocity of 5M/S), impact free, and stable vibration load applications, and is suitable for connecting vertical shafts such as mixers. Clamp shell coupling is a method of connecting two shafts by clamping them with bolts using two axially divided clamp shells. The torque is transmitted through the frictional force between the surfaces of the two halves of the coupling, and a flat key is used as an auxiliary connection. When assembling and disassembling the clamp shell coupling, the shaft does not need to move axially, so it is easy to assemble and disassemble. The disadvantage of the clamp shell coupling is that the two axis lines are alignedaccuracyLow, complex structure and shape, manufacturing and balancingaccuracyLow, only suitable for low-speed and load stable situations, usually the maximum outer edge linear velocity is not greater than 5m/s. When the linear velocity exceeds 5m/s, balance verification is required. JQ type clamp shell coupling (HG5-213-65)
When assembling and disassembling the clamp shell coupling, the shaft does not need to move axially, so it is easy to assemble and disassemble. The disadvantage of the clamp shell coupling is that the two axis lines are alignedaccuracyLow, complex structure and shape, manufacturing and balancingaccuracyLow, only suitable for low-speed and load stable situations, usually the maximum outer edge linear velocity is not greater than 5m/s. When the linear velocity exceeds 5m/s, balance verification is required. In order to improve the balance condition, bolts should be installed alternately in a positive and negative direction. The clamped coupling does not have axial, radial, and angular compensation performance. The characteristics of the vertical clamp shell coupling are similar to those of the clamp shell coupling, with a simple structure and easy assembly and disassembly. It is suitable for low-speed (maximum circumferential velocity of 5M/S), impact free, and stable vibration load applications, and is suitable for connecting vertical shafts such as mixers. Clamp shell coupling is a method of connecting two shafts by clamping them with bolts using two axially divided clamp shells. The torque is transmitted through the frictional force between the surfaces of the two halves of the coupling, and a flat key is used as an auxiliary connection. JQ type clamp shell coupling basic parameters and main dimensions JQ type clamp shell coupling is used for the connection of two mixing shafts when the reactor mixing shaft is too long and manufactured in two sections. If a clamp shell coupling is selected for the connection between the output shaft of the vertical reducer and the reactor mixing shaft, it needs to be specified at the time of ordering in order to meet non-standard requirements for the output shaft size