rinse.

This machine is a rotary bottle washing machine, mainly used for washing new bottles of beverages, water and other products. Then send the bottle to the filling machine for product filling.

PET bottles are fed into the equipment by a bottle sorting star wheel, clamped by a clamp and flipping mechanism, and then turned downwards. After rinsing with sterile water and draining, they are automatically flipped upwards and transported to the filling machine by a bottle discharge star wheel.
The main structure of the equipment, the parts in contact with the flushing medium, and the external protective cover are all made of high-quality stainless steel materials; Open gear transmission.
A brand new stainless steel clamp with a simple structure and easy adjustment; The contact area with the bottle mouth is small, effectively avoiding secondary pollution of the bottle mouth.
The bottle washing machine is equipped with a water collection tray to recycle the bottle washing water
When flushing bottles, the flushing volume per bottle is 105ml/s (at 0.25MPa)

bottling

The filling machine is designed and manufactured by China using the principle of isobaric filling, with German technology introduced,Realize the filling of liquid into the washed bottles sent by the bottle washing machine.

The filling valve adopts an isobaric mechanical valve, which is fast and sensitive for filling, and has high liquid level accuracy for filling.The centering guide adopts a guide rod type centering and a unique bottle mouth clamping technology to ensure accurate sealing between the bottle mouth and the filling valve, reducing the phenomenon of material leakage from the bottle mouth.The main transmission adopts gear transmission and open combination transmission, which has high efficiency, low noise, long service life, easy maintenance, and sufficient lubrication. The main motor speed of the machine is controlled by a frequency converter, and this machine adopts stepless frequency conversion speed regulation.The bottle guide system has a simple structure and can be quickly and conveniently changed according to the bottle type. The whole machine adopts a bottleneck structure for conveying.complete machinePLCautomatic control,Fault online display, such as bottle blockage, missing lid, etc.

Screw cap

The capping part will be used to screw the caps sorted by the capping machine onto the bottles that have already been filled, and then transported to the subsequent process by the conveyor chain.
The capping machine drives the rotating disc to rotate through a reducer. Remove the lid from the hopper through the outlet under the action of centrifugal force. There is a positive and negative lid separation device at the exit. When the reverse lid passes by, it automatically falls into the return pipeline and is blown into the hopper by wind power. Only the front cover can smoothly enter the slide, and the amount of cover in the hopper is automatically detected by a photoelectric switch to control the cover conveying machine, ensuring that the lower cover achieves the desired effect. When the cover enters the slide, it can smoothly enter the feeding cover plate. To prevent accidents, an anti reverse cover dial is also installed on the slide to ensure that the cover entering the feeding cover plate is correct. A pair of photoelectric switches are also installed on the slide to immediately stop the host when no cover is detected.