Product Introduction

FLOOLINE ECHOTOUCH ® The US03 intrinsically safe reflective ultrasonic level gauge achieves continuous level measurement with a maximum range of 9.8 '(3m) through continuous 4-20 mA analog signals, and is set up using the WebCal software. This type of sensor is suitable for medium tanks containing no foam or highly volatile media such as chemicals, water, waste water and oil. Typical application scenarios include miniature collection tanks, daily supply tanks, and wastewater tanks.

Technical Parameter

Range: 10.1cm... 3m

Accuracy: around ± 0.2%

Resolution: 1mm

Dead zone: 10.1cm

Wave speed width: 2 "(5cm)

Supply voltage: 14-28 VDC

Loop resistance: 500 Ω @ 24VDC

Signal output: 4-20mA, two-wire

Process temperature: -40 º C... 80 º C

Environmental temperature: -35 º C... 60 º C

Pressure: 2 bar

Shell rating: IP68

Shell material: PP

Sensor type: Reflective

Sensor pad: PVDF (polyvinylidene fluoride)

Cable:

Cable length: 48 "(1.2m)

Installation interface: 2 "NPT or 2" G

Installation gasket: N/a or Viton ®

Level: Intrinsic Safety

Explosion proof standard: Class I, Zone 1, Groups A, B, C, and D; Second level E, F, and G groups; Level 3; Level 1 Zone 0 IIC Group, Zone 20 IIC Group

Explosion proof certification: II 1G, EEx ia IIC Gc

Certification: CE