ISWR horizontal hot water pipeline pump

ISWR horizontal hot water pipeline pump

ISWR horizontal hot water pipeline pumpIt is based on the ISW type and produces a suitable hot water pipeline pump. This series of pumps has excellent performance, high reliability, long service life, reasonable structure, and beautiful appearance, and is at the forefront of the industry.

ISWR horizontal hot water pipeline pumpProduct features:

1. Smooth operation: The absolute concentricity of the pump shaft and the dynamic and static balance of the impeller ensure smooth operation without any vibration.

2. No leakage: The hard alloy seals made of different materials ensure that there is no leakage during the transportation of different media.

3. Low noise: The water pump supported by two low-noise bearings runs smoothly, with almost no noise except for weak motor noise.

4. Low failure rate: The structure is simple and the key parts are of international quality; Matching, the whole machine's fault free working time is greatly improved.

5. Easy maintenance: Replacing seals and bearings is simple and convenient.

6. More land saving: The exit can be arranged in three directions: left, right, and up, which is convenient for pipeline layout and installation, saving space.

ISWR horizontal hot water pipeline pumpWorking conditions:

1. The suction pressure is ≤ 1.6MPa, or the pump system * high working pressure is ≤ 1.6MPa, that is, the pump suction inlet pressure+pump head is ≤ 1.6MPa, and the pump static pressure test pressure is 2.5MPa. Please specify the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6MPa, it should be separately stated when ordering, so that the overcurrent and connection parts of the hot water pump can be made of cast steel materials during manufacturing.

2. Environmental temperature<40 ℃, relative humidity<95%.

3. The volume content of solid particles in the conveyed medium shall not exceed 0.1% of the unit volume, and the particle size shall be less than 0.2mm.

Note: If the medium used is with small particles, please indicate it when ordering so that the manufacturer can use wear-resistant mechanical seals.

ISWR horizontal hot water pipeline pumpMain purpose:

1. Used for transporting clean water and other liquids with physical and chemical properties similar to clean water, suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire pressurization, long-distance transportation, HVAC refrigeration cycle, bathroom and other cold and warm water circulation pressurization and equipment matching, with a temperature of t ≤ 80 ℃.

2. Widely applicable to boiler hot water pressurized circulation transportation and urban heating systems in metallurgy, chemical industry, textile, papermaking, hotels, restaurants, etc., with an operating temperature of t ≤ 120 ℃.

3. It is used for conveying liquids that do not contain solid particles, are corrosive, and have a viscosity similar to water. It is suitable for industries such as petroleum, chemical, metallurgical, power, papermaking, food and pharmaceuticals, and synthetic fibers. The operating temperature ranges from -20 ℃ to+120 ℃.

4. For transporting oil products such as gasoline, kerosene, diesel, or flammable and explosive liquids, the temperature of the transported medium is -20 to+120 ℃.