IPX1/IPX2 Vertical Drip Test Chamber DeviceIntroduction:

The drip device is mainly used to test the performance of products during storage, transportation, and use in rainy weather environments. It is mainly used to test the physical and other related properties of electrical and electronic products, lamps, electrical cabinets, electrical components, automobiles, motorcycles, and their parts under simulated rainy weather conditions. After testing, the performance of the product can be judged through calibration to determine whether it can meet the requirements for product design, improvement, calibration, and factory inspection.

The drip device meets the standards:

IEC60529; Manufacturing according to the IPX1/2 testing requirements specified in 1989+A1, GB4208, and GB7000.1 standards

IPX1/IPX2 Vertical Drip Test Chamber DeviceTechnical specifications:

IPx1

Method name: Vertical Drip Test;
Experimental equipment: drip test device;
Sample placement: Place the sample in its normal working position on a rotating sample table at a speed of 1r/min, with the distance from the top of the sample to the drip outlet not exceeding 200mm;

The distance between holes is 20X20mm
Experimental conditions: drip rate of 1 ± 0.5mm/min;
Duration: 10 minutes;

IPx2

Method name: Tilt 15 ° drip test;
Experimental equipment: drip test device;
Sample placement: Make one surface of the sample form a 15 ° angle with the perpendicular line, and the distance from the top of the sample to the drip outlet should not exceed 200mm. After each experiment, switch to another surface for a total of four times;
Experimental conditions: drip rate of 3 ± 0.5mm/min;

Duration: 4 × 2.5 min (10 min in total); ）

IPX1/IPX2 Vertical Drip Test Chamber DeviceTechnical Specifications: