IFT158 High Voltage Igniter

1. This igniter only has ignition function;

2. The detection line should be individually routed using plastic cable protection tubes. When transmitting remotely, it should be placed separately from the main cable to avoid external electromagnetic interference;

3. Working environment temperature: -10C -+65C without condensation;

4. Power supply: AC220V, voltage fluctuation requirement within -15/+10% range, 50/60HZ, neutral wire cannot carry floating voltage. Power: 18VA+25VA (ignition power 25VA);

5. Built in ignition transformer ignition current: 25mA, 22KVss, ignition gap is 2-3mm

6. High voltage lines should not be threaded through metal tubes, and should be routed separately from detection lines.

7. Fuse: 2A fuse type;

8. Can be used in conjunction with the automatic burner controller IFT258 for ignition.

Wiring Instructions

Wiring terminals: 1. Live wire, 2. Neutral wire. Output: High voltage ignition wire, grounding wire.