Horizontal ring machine SL-HT600W

Horizontal ring bodyWinding machineIt is a novel winding packaging machine designed and manufactured specifically for production enterprises of copper strip coils, steel strip coils, aluminum strip coils, bearings, cable coils, rubber tube coils, ring flange workpieces, various types of hose coils, corrugated tube coils, brake cable coils, high-pressure rubber tube coils, etc. Its advantage lies in the use of high-quality steel for manufacturing, which is durable and can last for more than ten years. Secondly, it has replaced the manual production mode, with high production efficiency, reduced labor intensity for workers, and improved the working environment for workers. Workers work in a relaxed, safe, and clean environment. The packaging effect is neat and can be packaged with multiple layers of paper, which can prevent dust, moisture, and protect the surface of the product.

Selection of Production Examination:

Packaging process instructions:

Using inner diameter of 50-76mm, outer diameter of 100-400mm, width of 45-120mm wrapped film or textile tape or composite paper tape, the packaging film rack is installed parallel to the winding ring or installed on the side, and the packaging film is perforated and wrapped

1. The operator adjusts the position between the rotating ring and the object according to the size of the object to be packaged, with the rotating ring passing through the inner hole unobstructed

2. Place the object to be packaged on a horizontal roller and input the specifications of the packaged product (do not input if there is no change in the product specifications)

3. Wrap the wrapping film around the edge of the package, press the start switch, and the aluminum ring starts to rotate. Then, the roller drives the package to rotate horizontally. After 360 degrees, it automatically stops or presses the stop switch. Aluminum rings and rollers stop running.

4. After completing the packaging, use adhesive tape to bond the tail tape. Take out the packaged object.

This device is a customized model, and the selection needs to be confirmed based on the actual situation of the customer's product, such as material, outer diameter, inner diameter, and width.