Hard Mini812Resin embedding reagent kit(Hard-Plus Resin-812)all-new812Resin formula completely solves the wrinkles and series problems that occur during sample embedding. usually,Each batch's812The resin and its epoxy equivalent are basically the same,812Epoxy resin is very stable under electron beam and can achieve good dyeing effect with heavy metals. Moreover, it is hard812The viscosity of epoxy resin is lower than that of ordinaryEpon812Resin can penetrate the sample completely and effectively. For hard materials812The operation and embedding of resin are completely equivalent toEpon812Resin.

Usually, using this812Resin no longer requires intermediate reagents such as epoxy propane for treatment, and can be directly impregnated and embedded after ethanol dehydration treatment.60ºCAggregation temperature required24 – 48The longer the time or the higher the polymerization temperature, the harder the embedded block obtained. For greater than1x1mm3For the sample size, it is recommended to use the intermediate solvent epichlorohydrin as a dehydrating agent.

This unique formula812The ready to use mixing kit provided by the resin embedding reagent has all components set to their values, and researchers need to fully mix them according to the instructions. Each set consists of5Composed of identical and independent mini sets, each mini set weighs approximately100gChoosing this kit is equivalent to choosing convenience and speed, as it is almost suitable for many existing embedding experimental procedures. The differences in these experimental steps generally vary with the density and hardness of the sample. For example, for harder samples such as cartilage and bones, use hard materials812The steps of resin embedding reagent kit need to be adjusted slightly, which should require longer dehydration and soaking time compared to general soft samples.

Ordering information: