German UWT heavy hammer level gaugeMeasurement principle: Heavy hammer level gauge Application conditions: Continuous real-time monitoring of various solid materials or measurement of solid-liquid interface (sediment interface)

Certification certificate:

CE,ATEX,FM/CSA,IEC-Ex,TR-CU

Explosion proof form:

dust ignition-proof

By driving the steel belt/cable reel with a motor, the induction hammer at the end of the steel belt/cable is lowered into the interior of the silo. When the induction hammer touches the surface of the material, the motor swings mechanically, and the motor reverses to pull the induction hammer back to the top stop position, outputting an analog signal corresponding to the material level;

During this measurement process, the electronic module measures the distance in real time through Hall elements, and processes it through an internal intelligent microprocessor chip to convert the material level or volume into an analog output signal. The signal is updated every time the induction hammer is used for measurement and continues until the next measurement.

Application conditions:Continuous real-time monitoring of various solid materials or measurement of solid-liquid interface (sediment interface)

German UWT heavy hammer level gaugePerformance characteristics:

Suitable for almost all solid materials

Simple, reliable, and maintenance free measurement principle

International certification applicable for use in potentially explosive environments (dust explosion prevention)

Cast aluminum shell with anti-corrosion coatingProtection level IP66, completely isolated from electronics and machinery

Adopting special steel belt or steel cable transmission methods to avoid cable jamming and hammering

Adopting a motor swing pure mechanical action response method to avoid dust interference, faster response speed, and avoid burying hammers

Adopting a unique high-quality motor with a pulling force of up to 800N

Steel strip integrated pop-up cleaner to avoid the influence of sticky materials

Intelligent self diagnosis and self struggle function

Easy installation and debugging, capable of remote startup measurement

Optional two sets of functional relays

Various induction hammers are available, including internal heaters and extended protective sleeves

Process conditions:

Range 15m/30m, temperature 80 ℃, pressure 0.2bar

Electrical parameters:

Supply voltage 115/230VAC/20... 28VDC, signal output 0/4-20mA, relay pulse

Bus communication MODBUS RTU

Mechanical parameters:

Thread/flange, stainless steel 301/303/304/316L, PA anti-corrosion coating; Aiming flange adjustable from 0 ° to 50 °

Standard motor 800N, measuring speed 12m/min;

Various hammer heads to choose from