Ge Pu water phenolphthalein alkalinity analyzer

Ge Pu water phenolphthalein alkalinity analyzerAccording to the principle of titration colorimetry, the selectable limit values are controlled, and accurate measurement readings are provided through extinction method. Multiple functions ensure the reliability of real-time operation. Low maintenance and low reagent consumption, able to operate continuously for a long time, basically maintenance free, especially suitable for using circulating cooling water, boiler water, etcsoftenWater quality alkalilinear measureThe detection and control can be easily combined with our MCS series multi-channel distributor to achieve automatic measurement of 2-8 channels without stopping the machine.

Aqualysis800Characteristics of water quality alkalinity analyzer：

♦Automatic calibration, automatic diagnosis, and monitoring

♦Low maintenance and reagent consumption，cost-effectivenesstallHigh measurement accuracy
♦Compact design, 400x300x180mm/4Kg
♦Chinese and English LCD color screen displayEasy to install and simple to operate
♦Continuous measurement or interval measurement (0~360min)
♦2-channel programmable digital input (can be linked with external devices),4-channel programmable contact output
♦Data storage, fault recording, RS485, 4-20 mA output

Aqualysis800 water alkalinity analyzer parameters:

Measurement method: Titration colorimetric method
Measurement time: 2-8 minutes（Depends on the alkalinity of water）

Accuracy: The upper limit of the selected reagent±2%
Repeatability: The upper limit of the selected reagent±1%
Size: 400x300x180mm (HxWxD)
Display: LCD color screen display
Optional units: ° dH, ° f, ppmCaCO3, mmol/l
Output: 1. 4-channel programmable relay output (max.250V, 4A)
2. 1 channel 4-20 mA signal, max 750 Ω
3. 1 RS485 output
Input: 1. IN1 input (start analysis/flow control switch/water meter) 2. IN2 input (reset device)
Analysis cycle: time interval measurement (0~360min)/external signal/flow signal
Rinse time: adjustable (15-1800s)
Water quality requirements: pH: 4-10; Iron:<3 ppm; Copper:<0.2 ppm; Aluminum:<0.1 ppm; Manganese:<0.2 ppm
Temperature: Environment: 10 ° C-40 ° C, Water sample: 5 ° C-40 ° C
Pressure: ca. 0.2-8 bar (max) (recommended 1-2 bar)
Power supply: 85-265 VAC, 47-63Hz, power consumption: 25VA (during operation), 3.5VA (during standby)
Protection, etc.: IP65
Installation method: Wall mounted