Product Overview:
The gasoline diesel explosion-proof pipeline pump is suitable for places where the conveying medium is flammable and explosive such as gasoline, kerosene, diesel, etc. The pump impeller adopts wear-resistant and corrosion-resistant copper impeller, and the motor adopts explosion-proof motor. In terms of performance, it is safer and more durable.

The function of the copper impeller in this pump is:Corrosion resistance and wear resistance are on the one hand, and on the other hand, their flash point is relatively low when pumping diesel gasoline.

Gasoline and diesel explosion-proof pipeline pumpProduct features:
1. The pump is a vertical structure with the same inlet and outlet diameters and located on the same centerline. It can be installed in pipelines like a valve, with a compact and beautiful appearance, small footprint, and low construction investment. If a protective cover is added, it can be used outdoors.
2. The impeller is directly installed on the extended shaft of the motor, with a short axial dimension and compact structure. The pump and motor bearings are reasonably configured, which can effectively balance the radial and axial loads generated by the pump operation, ensuring smooth operation, low vibration, and low noise of the pump.
3. The shaft seal adopts mechanical seal or a combination of mechanical seals, using imported titanium alloy sealing rings, medium-sized high-temperature resistant mechanical seals, and hard alloy materials for wear-resistant seals, which can effectively extend the service life of mechanical seals.
4. Easy installation and maintenance, no need to disassemble the pipeline system, just remove the pump coupling nut to extract all rotor components.
5. Pumps can be operated in series or parallel according to the requirements of flow rate and head.
6. Vertical and horizontal installation of pumps can be adopted according to the requirements of pipeline layout.

Gasoline and diesel explosion-proof pipeline pumpWorking conditions:
1. The suction pressure is ≤ 1.0MPa, or the maximum working pressure of the pump system is ≤ 1.6MPa, that is, the pump suction inlet pressure+pump head is ≤ 1.6MPa. The static pressure test pressure of the pump is 2.5MPa. Please specify the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6MPa, it should be separately stated when ordering, so that the overcurrent and connection parts of the pump can be made of cast steel materials during manufacturing.
2. Environmental temperature<40 ℃, relative humidity<95%.
3. The volume content of solid particles in the conveyed medium shall not exceed 0.1% of the unit volume, and the particle size shall be less than 0.2mm.
Note: If the medium used is with small particles, please specify when ordering so that the manufacturer can use wear-resistant mechanical seals.

Gasoline and diesel explosion-proof pipeline pumpMain purpose:

1.ISGB type verticalExplosion proof pipeline centrifugal pumpIt is used for transporting clean water and other liquids with physical and chemical properties similar to clean water. It is suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire pressurization, long-distance transportation, HVAC refrigeration cycle, bathroom and other cold and warm water circulation pressurization and equipment matching. The operating temperature is T ＜ 80 ℃.
2.Suitable for pumps used in metallurgy, chemical industry, textile, wood processing, papermaking, as well as high-temperature hot water pressurized circulation transportation for boilers in hotels, bathrooms, and guesthouses, and for urban housing heating circulation. The operating temperature is below 120 ℃.
3. GRG type vertical high-temperature centrifugal pumpWidely used in energy, metallurgy, chemical industry, textile, papermaking, as well as high-temperature hot water pressurized circulation transportation for boilers in hotels, bathrooms, and guesthouses, and as a pump for urban housing heating circulation, with operating temperatures below 240 ℃.
4.It is used for conveying liquids that do not contain solid particles, are corrosive, and have a viscosity similar to water. It is suitable for industries such as petroleum, chemical, metallurgical, power, papermaking, food and pharmaceuticals, and synthetic fibers. The operating temperature ranges from -20 ℃ to 120 ℃.
5.For transporting petroleum products such as gasoline, kerosene, diesel, etc., the temperature of the transported medium is -20 ℃~+120 ℃.
6.IHGB vertical stainless steel explosion-proof chemical centrifugal pumpSuitable for transporting flammable chemical liquids.
7. ISGD, IRGD, GRGD, IHGH, YGD, IHGBD vertical low-speed centrifugal pumps are suitable for occasions with low environmental noise requirements and air conditioning circulation.

Gasoline and diesel explosion-proof pipeline pumps are specially equipped with copper impellers and explosion-proof motors, with excellent performance and direct sales from the manufacturer.

Related products: