Fulaike 3150 Automatic Water Softener Industrial Boiler Automatic Water Softening Equipment, Xi'an Penghao Water Treatment Equipment Co., Ltd. Boiler Automatic Water Softener Working Principle and Control Method: 1. Working Principle: The hardness of water is mainly composed of cations such as calcium (Ca2+) and magnesium (Mg2+) ions. When the raw water containing hardness ions passes through the resin layer of the exchanger, the calcium and magnesium ions in the water are replaced by the sodium ions in the resin. The resin adsorbs the calcium and magnesium ions, and the sodium ions enter the water. In this way, the water flowing out of the exchanger is softened water without hardness ions. As the exchange process continues, all Na+ions in the resin are removed and the exchange function is lost. At this time, NaCl solution must be used to regenerate the resin, replacing the Ca2+and Mg2+adsorbed by the resin. The resin re adsorbs sodium ions and restores its softening exchange ability. 2. Control mode: (1) Time type: restoration starts at the set time, with a short cycle of one day, suitable for stable water supply systems such as air conditioning systems. It has the characteristics of simple control mode, low cost, and easy operation; (2) Flow type: It starts to restore when the flow reaches the set value and is suitable for all system water supply. This method has high accuracy, stable and reliable water output, and is equipped with a memory function. There is no need to reset the values after a power outage; (3) Microcomputer type: The system consists of 2-3 automatic water softeners combined, fully controlled by computer programs. If equipped with a central controller, remote control can be achieved. The computer can monitor the working status of each water softener at any time through a microprocessor, display and store information, and randomly set working and regeneration conditions. Suitable for water supply systems with high levels of automation. purposeMainly used for industrial and civilian softened water preparation, such as boiler feedwater, air conditioning system makeup water, heat exchangers, power plants, chemical, textile, biopharmaceutical, electronic, and pure water system pretreatment.
Features of the equipment1. High degree of automation and stable water supply conditions. 2. Advanced program control device, accurate and reliable operation, replaces manual operation, and fully realizes automatic conversion of various links in water treatment. 3. High efficiency, low energy consumption, and economical operating costs. Due to the reasonable overall design of the water softener, the exchange capacity of the resin can be fully utilized. The equipment adopts a jet type salt suction instead of a salt pump, reducing energy consumption. 4. The equipment has a compact structure, occupies a small area, saves infrastructure investment, is easy to install and debug, and is easy to use and operate.