VIP member
![Fujian Pressure Sensor [MPM388 Pressure Resistance Type]](http://img79.mtnets.com/5/20210113/637461427065388275539.jpg)
Fujian Pressure Sensor [MPM388 Pressure Resistance Type]
Stable quality: Implement full process quality monitoring, meticulous and all-round testing! Reasonable price: Efficient internal cost control reduces
Product details
The MPM388 piezoresistive pressure sensor is composed of silicon piezoresistive sensitive elements packaged in different pressure interfaces. The measured pressure is applied to the silicon sensitive element through the pressure interface, achieving linear conversion between the applied pressure and the output voltage signal. The thick film resistor network adjusted by laser compensates for the zero point and temperature performance of the sensor, and is suitable for pressure calibration instruments, automotive electronics, aerospace, air pressure control, industrial measurement and control, etc. The pressure interface of this type of sensor, which complies with the HB4-3 standard, has been widely used in the aviation industry.
Setonline 2.03 (applicable to 460 and 484x series)
outline structure
Selection Guide
| MPM388 | Type piezoresistive pressure sensor | |||||||||||||
| code | measuring range | notes | code | measuring range | notes | |||||||||
| 0B | 0kPa～20kPa | G | 09 | 0kPa～700kPa | G、A | |||||||||
| 0A | 0kPa～35kPa | G | 10 | 0MPa～1.0MPa | G、A | |||||||||
| 02 | 0kPa～70kPa | G、A | 12 | 0MPa～2.0MPa | G、A | |||||||||
| 03 | 0kPa～100kPa | G、A | 13 | 0MPa～3.5MPa | G、A、S | |||||||||
| 07 | 0kPa～200kPa | G、A | 14 | 0MPa～7.0MPa | S | |||||||||
| 08 | 0kPa～350kPa | G、A | ||||||||||||
| code | pressure type | |||||||||||||
| G | Gauge pressure type | |||||||||||||
| A | Absolute pressure type | |||||||||||||
| S | Sealed gauge pressure type | |||||||||||||
| code | Power supply mode | |||||||||||||
| L | Constant current power supply | |||||||||||||
| Select code | Pressure connection (can also be designed and produced according to user requirements) | |||||||||||||
| Ⅰ | M12 × 1 external thread (HB4-3), type I (with 1.5m cable) | |||||||||||||
| Ⅱ | M12 × 1 external thread (flat), type II (connector connection) | |||||||||||||
| Ⅲ | M10 external thread (ball head), type III (Φ 0.45 gold-plated Kovar lead) | |||||||||||||
| MPM388 08 G L Ⅰ complete specifications and models | ||||||||||||||
Selection Tips
1. The part of the cable exceeding 1.5m shall be charged according to its length.
2. If the ordered product requires a metrological verification certificate or other special requirements, please consult with our company and indicate it in the order.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-