JJ-4SFour link electric water bath mixer

Product features:
JJ-4SFour link electric water bath mixerIt has the characteristics of timing, speed regulation, and voltage stabilization. The motor adopts permanent magnet DC motor, which has low noise, obvious speed regulation, and huge low-speed operating force. The stirring rod is made of stainless steel, which enhances its corrosion resistance. Widely applicable to scientific research, environmental protection, health, petroleum, metallurgical water plants, as well as laboratories in various colleges and universities. Electric constant temperature water bath is used for distillation, drying, concentration, and warming of chemical or biological products.
Technical parameters:
Power supply: Single AC 220V 50HZ
Motor power: 100Wx4
Speed range: Start -2500 rpm
Timing range: 0-120 minutes
Solution bottle lifting height: 20cm
Heating power: 1000W
Temperature control range: Room temperature -99.9 ℃
Temperature control accuracy: ± 0.5 ℃
Mixing volume: 2000mlx4
Note: Synchronous and asynchronous, digital display speed measurement is optional when purchasing

usage method:
Firstly, install the stirring rod on each of the four shafts, tighten them, and turn off all the work switches. And adjust the speed knob to the low position, place the solution bottle to be stirred in the four hole water bath, raise it to the appropriate height, and align the stirring rod with the center. Turn the timing knob to the ON position or the desired timing time, turn on the power, and gradually adjust from low speed to high speed to the desired working speed. Do not start at high speed.
Set temperature: Press the SET key to set or view the temperature set point. Press the SET key and the digital display character will start flashing, indicating that the instrument has entered the set state. Press the △ key to increase the set value, press the ▽ key to decrease the set value, and press the △ or ▽ key to quickly change the data. Press the SET key again to return the instrument to normal working state and complete the temperature setting. If the temperature controller is intelligent, a separate temperature control manual should be attached
This machine has two indicator lights for heating and constant temperature to indicate the working status, and the temperature gauge shows the actual temperature inside the pot.