Food microbiological detection instrument and equipment systemATP fluorescence detector is widely used in various industries such as bacterial and microbial detection, medical and health, food safety, market law enforcement, surface cleanliness testing, medical and epidemic prevention, water quality and water management, production line hygiene, industrial water treatment, environmental protection testing, customs entry and exit quarantine, and other law enforcement departments.

Product Introduction:
This device is a newly upgraded product with a large touch screen display, replacing traditional buttons. The operation uses biochemical reaction methods to detect ATP content, and the ATP fluorescence detector is based on the principle of firefly luminescence, using the "luciferase luciferin system" to quickly detect adenosine triphosphate (ATP). ATP swabs contain reagents that can lyse cell membranes, which can release ATP from cells and react with specific enzymes contained in the reagents to produce light. The luminescence value is then detected using a fluorescence lux meter, and the number of microorganisms is proportional to the luminescence value. Since all living cells contain a constant amount of ATP, the ATP content can clearly indicate the amount of residual microorganisms and other organisms in the sample, which is used to determine the hygiene condition.
Instrument application:
The Yuntang ATP fluorescence detector is widely used in various industries such as bacterial and microbial detection, medical and health, food safety, market law enforcement, surface cleanliness testing, medical and epidemic prevention, water quality and water management, production line hygiene, industrial water treatment, environmental protection testing, customs entry and exit quarantine, and other law enforcement departments.

Instrument characteristics:
Upper and lower limits can be set according to environmental detection requirements to achieve rapid data evaluation and warning, as well as rapid screening of surface cleanliness.practicality
10-15～10-18mol
Conventional cultivation methods require 18-24 hours or more, while ATP only takes a few secondshigh sensitivity
There is a clear correlation between the number of microorganisms and the ATP content in microorganisms. By detecting ATP content, the number of microorganisms involved in the reaction can be indirectly determinedfast speed
Traditional cultivation methods require trained technicians to operate in the laboratory; The ATP rapid cleanliness detection operation is very simple, and only simple training is needed for on-site operation by general staff.feasibility
The test tube adopts a flexible plug-in design, which can be regularly cleaned and used for a long time, extending the service life of the instrument.operability

Food microbiological detection instrument and equipment systemMain parameters:
1. Display screen: 3.5-inch high-precision graphic touch screen
2. Processor: 32-bit high-speed data processing chip
3. Detection accuracy: 1 × 10-18mol
4. Coliform bacteria: 1-106 cfu
5. Detection range: 0 to 9999RLUs
6. Detection time: 15 seconds
7. Detection interference: ± 5% or ± 5RLUs
8. Operating temperature range: 5 ℃ to 40 ℃
9. Operating humidity range: 20-85%
10. ATP recovery rate: 90-110%
11. Detection mode: RLU, Escherichia coli screening
12. 50 user ID settings
13. Number of adjustable result limits: 251
14. Automatically determine whether it is qualified or unqualified
15. Automatically calculate the pass rate
16、 内置自校光源
17. Self check after 30 seconds of startup
18. Equipped with a miniUSB interface, the results can be uploaded to a PC
19. Equipped with software driven USB drives instead of traditional CDs
20. Instrument size (W × H × D): 188mm × 77mm × 37mm
21. Use rechargeable lithium batteries without battery replacement
22. Standby state (20 ℃): 6 months
23. Chinese operation manual
24. Stable liquid luciferase
25. Wet integrated collection swab
Random configuration: ATP fluorescence detector (handheld) host, aluminum alloy carrying case, driver USB drive, instrument package, hanging rope, PC data cable, data analysis software, Chinese operation manual Main parameters:
1. Display: 3.5-inch high precision graphic touch screen
2. Processor: 32-bit high-speed data processing chip
3. Detection accuracy: 1 × 10-18mol
4. Coliform: 1-106cfu
5. Detection range: 0to9999rlus
6. Detection time: 15 seconds
7. Detection interference: ± 5% or ± 5rlus
8. Operating temperature range: 5 ℃ to 40 ℃
9. Operating humidity range: 20-85%
10. ATP recovery: 90-110%
11. Detection mode: RLU, coliform group screening
12. 50 user ID settings
13. Number of settable result limits: 251
14. Automatic judgment of qualified and unqualified
15. Automatic statistics of qualified rate
16. Built in self calibration light source
17. Power on 30 second self test
18. With MINIUSB interface, the result can be uploaded to PC
19. Equipped with special software drive U disk instead of traditional optical disk
20. Instrument size (w × h × d): 188mm × 77mm × 37mm
21. Use rechargeable lithium battery to avoid battery replacement
22. Standby state (20 ℃): 6 months
23. Chinese operation manual
24. Stable liquid luciferase
25. Wet integrated collection swab
Random configuration: ATP fluorescence detector (handheld) host, aluminum alloy suitcase, drive U disk, instrument bag, lanyard, PC data line, data analysis software, Chinese operation manual